Console Output
Skipping 425 KB..
Full LogE: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/distributed_bridge/tunnel_mesh.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/http_filter/http-parse-complete.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/http_filter/http-parse-simple.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/neighbor_sharing/tc_neighbor_sharing.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/simple_tc.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/tc_perf_event.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/tunnel_monitor/main.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/tunnel_monitor/monitor.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/vlan_learning/vlan_learning.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/xdp/xdp_drop_count.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/xdp/xdp_macswap_count.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/xdp/xdp_redirect_cpu.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/networking/xdp/xdp_redirect_map.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/biolatpcts.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/bitehist.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/dddos.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/disksnoop.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/hello_fields.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/hello_perf_output.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/hello_perf_output_using_ns.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/kvm_hypercall.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/mallocstacks.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/mysqld_query.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/nflatency.py #!/usr/bin/python3
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/nodejs_http_server.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/stack_buildid_example.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/stacksnoop.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/strlen_count.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/strlen_hist.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/strlen_hist_ifunc.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/strlen_snoop.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/sync_timing.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/task_switch.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/tcpv4connect.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/trace_fields.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/trace_perf_output.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/undump.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/urandomread-explicit.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/urandomread.py #!/usr/bin/python
E: libbcc-examples: python-script-but-no-python-dep usr/share/bcc/examples/tracing/vfsreadlat.py #!/usr/bin/python
E: python-bcc: extended-description-is-empty
E: bcc-lua: arch-independent-package-contains-binary-or-object usr/bin/bcc-lua
E: bcc-lua: missing-dependency-on-libc needed by usr/bin/bcc-lua
E: bcc-lua: extended-description-is-empty
W: bcc-lua: binary-without-manpage usr/bin/bcc-lua
E: bcc-tools: arch-independent-package-contains-binary-or-object usr/share/bcc/introspection/bps
E: bcc-tools: arch-dependent-file-in-usr-share usr/share/bcc/introspection/bps
E: bcc-tools: missing-dependency-on-libc needed by usr/share/bcc/introspection/bps
E: bcc-tools: extended-description-is-empty
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/argdist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/bashreadline #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/bindsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/biolatency #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/biolatpcts #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/biosnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/biotop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/bitesize #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/bpflist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/btrfsdist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/btrfsslower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/cachestat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/cachetop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/capable #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/compactsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/cpudist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/cpuunclaimed #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/criticalstat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/dbslower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/dbstat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/dcsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/dcstat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/deadlock #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/dirtop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/drsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/execsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/exitsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/ext4dist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/ext4slower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/filelife #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/fileslower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/filetop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/funccount #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/funcinterval #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/funclatency #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/funcslower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/gethostlatency #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/hardirqs #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/inject #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/killsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/klockstat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/kvmexit #!python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/lib/ucalls #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/lib/uflow #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/lib/ugc #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/lib/uobjnew #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/lib/ustat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/lib/uthreads #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/llcstat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/mdflush #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/memleak #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/mountsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/mysqld_qslower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/netqtop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/nfsdist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/nfsslower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/offcputime #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/offwaketime #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/bashreadline #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/biosnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/compactsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/filelife #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/gethostlatency #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/hardirqs #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/killsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/memleak #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/offcputime #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/offwaketime #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/oomkill #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/opensnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/profile #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/softirqs #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/stackcount #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/stacksnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/statsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/syncsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/tcpaccept #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/tcpconnect #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/old/wakeuptime #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/oomkill #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/opensnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/pidpersec #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/profile #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/readahead #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/runqlat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/runqlen #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/runqslower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/shmsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/slabratetop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/sofdsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/softirqs #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/solisten #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/sslsniff #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/stackcount #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/statsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/swapin #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/syncsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/syscount #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcpaccept #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcpconnect #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcpconnlat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcpdrop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcplife #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcpretrans #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcprtt #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcpstates #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcpsubnet #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcpsynbl #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcptop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tcptracer #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/threadsnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/tplist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/trace #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/ttysnoop #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/vfscount #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/vfsstat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/virtiostat #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/wakeuptime #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/xfsdist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/xfsslower #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/zfsdist #!/usr/bin/python
E: bcc-tools: python-script-but-no-python-dep usr/share/bcc/tools/zfsslower #!/usr/bin/python
E: python3-bcc: extended-description-is-empty
Finished running lintian.
+ popd
~/jenkins/workspace/bcc-pr/label/ubuntu1804
+ cp /tmp/debuild.iF9fGJ/bcc-lua_0.22.0-20.git.ccce6a0f_all.deb /tmp/debuild.iF9fGJ/bcc-tools_0.22.0-20.git.ccce6a0f_all.deb /tmp/debuild.iF9fGJ/libbcc-examples_0.22.0-20.git.ccce6a0f_amd64.deb /tmp/debuild.iF9fGJ/libbcc_0.22.0-20.git.ccce6a0f_amd64.deb /tmp/debuild.iF9fGJ/python-bcc_0.22.0-20.git.ccce6a0f_all.deb /tmp/debuild.iF9fGJ/python3-bcc_0.22.0-20.git.ccce6a0f_all.deb .
+ cleanup
+ [[ -d /tmp/debuild.iF9fGJ ]]
+ rm -rf /tmp/debuild.iF9fGJ
+ sudo dpkg -i bcc-lua_0.22.0-20.git.ccce6a0f_all.deb bcc-tools_0.22.0-20.git.ccce6a0f_all.deb libbcc-examples_0.22.0-20.git.ccce6a0f_amd64.deb libbcc_0.22.0-20.git.ccce6a0f_amd64.deb python-bcc_0.22.0-20.git.ccce6a0f_all.deb python3-bcc_0.22.0-20.git.ccce6a0f_all.deb
Selecting previously unselected package bcc-lua.
(Reading database ... 79280 files and directories currently installed.)
Preparing to unpack bcc-lua_0.22.0-20.git.ccce6a0f_all.deb ...
Unpacking bcc-lua (0.22.0-20.git.ccce6a0f) ...
Selecting previously unselected package bcc-tools.
Preparing to unpack bcc-tools_0.22.0-20.git.ccce6a0f_all.deb ...
Unpacking bcc-tools (0.22.0-20.git.ccce6a0f) ...
Selecting previously unselected package libbcc-examples.
Preparing to unpack libbcc-examples_0.22.0-20.git.ccce6a0f_amd64.deb ...
Unpacking libbcc-examples (0.22.0-20.git.ccce6a0f) ...
Selecting previously unselected package libbcc.
Preparing to unpack libbcc_0.22.0-20.git.ccce6a0f_amd64.deb ...
Unpacking libbcc (0.22.0-20.git.ccce6a0f) ...
Selecting previously unselected package python-bcc.
Preparing to unpack python-bcc_0.22.0-20.git.ccce6a0f_all.deb ...
Unpacking python-bcc (0.22.0-20.git.ccce6a0f) ...
Selecting previously unselected package python3-bcc.
Preparing to unpack python3-bcc_0.22.0-20.git.ccce6a0f_all.deb ...
Unpacking python3-bcc (0.22.0-20.git.ccce6a0f) ...
Setting up libbcc (0.22.0-20.git.ccce6a0f) ...
Setting up python-bcc (0.22.0-20.git.ccce6a0f) ...
Setting up python3-bcc (0.22.0-20.git.ccce6a0f) ...
Setting up bcc-lua (0.22.0-20.git.ccce6a0f) ...
Setting up bcc-tools (0.22.0-20.git.ccce6a0f) ...
Setting up libbcc-examples (0.22.0-20.git.ccce6a0f) ...
Processing triggers for libc-bin (2.27-3ubuntu1) ...
+ mkdir upload
+ mv bcc-lua_0.22.0-20.git.ccce6a0f_all.deb bcc-tools_0.22.0-20.git.ccce6a0f_all.deb libbcc-examples_0.22.0-20.git.ccce6a0f_amd64.deb libbcc_0.22.0-20.git.ccce6a0f_amd64.deb python-bcc_0.22.0-20.git.ccce6a0f_all.deb python3-bcc_0.22.0-20.git.ccce6a0f_all.deb upload
[ubuntu1804] $ /bin/sh -xe /tmp/jenkins5437343089111365950.sh
+ mkdir build
+ cd build
+ [[ ubuntu1804 ubuntu1804-slave-db9 = *fc28* ]]
/tmp/jenkins5437343089111365950.sh: 4: /tmp/jenkins5437343089111365950.sh: [[: not found
+ cmake ..
-- The C compiler identification is GNU 7.3.0
-- The CXX compiler identification is GNU 7.3.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Latest recognized Git tag is v0.22.0
-- Git HEAD is ccce6a0fe78a5d5f591dee390b52c8923ec120ed
-- Revision is 0.22.0-ccce6a0f
-- Performing Test HAVE_NO_PIE_FLAG
-- Performing Test HAVE_NO_PIE_FLAG - Success
-- Performing Test HAVE_REALLOCARRAY_SUPPORT
-- Performing Test HAVE_REALLOCARRAY_SUPPORT - Success
-- Found LLVM: /usr/lib/llvm-6.0/include 6.0.0
-- Found BISON: /usr/bin/bison (found version "3.0.4")
-- Found FLEX: /usr/bin/flex (found version "2.6.4")
-- Found LibElf: /usr/lib/x86_64-linux-gnu/libelf.so
-- Performing Test ELF_GETSHDRSTRNDX
-- Performing Test ELF_GETSHDRSTRNDX - Success
-- Could NOT find LibDebuginfod (missing: LIBDEBUGINFOD_LIBRARIES LIBDEBUGINFOD_INCLUDE_DIRS)
-- Using static-libstdc++
-- Found LuaJIT: /usr/lib/x86_64-linux-gnu/libluajit-5.1.a;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libm.so
-- Configuring done
-- Generating done
-- Build files have been written to: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build
+ make -j2 -C tests/cc
make: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/cc'
make[1]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target usdt_test_lib
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 0%] Building CXX object tests/cc/CMakeFiles/usdt_test_lib.dir/usdt_test_lib.cc.o
[ 2%] Linking CXX shared library libusdt_test_lib.so
Scanning dependencies of target clang_frontend
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 2%] Building CXX object src/cc/frontends/clang/CMakeFiles/clang_frontend.dir/loader.cc.o
[ 2%] Built target usdt_test_lib
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target bcc-loader-static
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 5%] Building CXX object src/cc/CMakeFiles/bcc-loader-static.dir/bcc_syms.cc.o
In file included from /usr/lib/llvm-6.0/include/clang/AST/RecursiveASTVisitor.h:24:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/b_frontend_action.h:23,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/loader.cc:57:
/usr/lib/llvm-6.0/include/clang/AST/DeclOpenMP.h:97:1: warning: multi-line comment [-Wcomment]
/// #pragma omp declare reduction (foo : int,float : omp_out += omp_in) \
^
[ 5%] Building C object src/cc/CMakeFiles/bcc-loader-static.dir/bcc_elf.c.o
[ 5%] Building C object src/cc/CMakeFiles/bcc-loader-static.dir/bcc_perf_map.c.o
[ 8%] Building C object src/cc/CMakeFiles/bcc-loader-static.dir/bcc_proc.c.o
[ 8%] Building CXX object src/cc/CMakeFiles/bcc-loader-static.dir/common.cc.o
[ 8%] Linking CXX static library libbcc-loader-static.a
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 8%] Built target bcc-loader-static
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target bpf-static
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 8%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf.c.o
[ 8%] Building C object src/cc/CMakeFiles/bpf-static.dir/perf_reader.c.o
[ 11%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/bpf.c.o
[ 11%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/bpf_prog_linfo.c.o
[ 11%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/btf.c.o
[ 13%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/btf_dump.c.o
[ 13%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/gen_loader.c.o
[ 13%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/hashmap.c.o
[ 13%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/libbpf.c.o
[ 13%] Building CXX object src/cc/frontends/clang/CMakeFiles/clang_frontend.dir/b_frontend_action.cc.o
In file included from /usr/lib/llvm-6.0/include/clang/AST/RecursiveASTVisitor.h:24:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/b_frontend_action.h:23,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/b_frontend_action.cc:31:
/usr/lib/llvm-6.0/include/clang/AST/DeclOpenMP.h:97:1: warning: multi-line comment [-Wcomment]
/// #pragma omp declare reduction (foo : int,float : omp_out += omp_in) \
^
[ 16%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/libbpf_errno.c.o
[ 16%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/libbpf_probes.c.o
[ 16%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/linker.c.o
[ 19%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/netlink.c.o
[ 19%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/nlattr.c.o
[ 19%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/relo_core.c.o
[ 22%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/ringbuf.c.o
[ 22%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/str_error.c.o
[ 22%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/strset.c.o
[ 25%] Building C object src/cc/CMakeFiles/bpf-static.dir/libbpf/src/xsk.c.o
[ 25%] Building CXX object src/cc/CMakeFiles/bpf-static.dir/bcc_syms.cc.o
[ 25%] Building C object src/cc/CMakeFiles/bpf-static.dir/bcc_elf.c.o
[ 27%] Building C object src/cc/CMakeFiles/bpf-static.dir/bcc_perf_map.c.o
[ 27%] Building C object src/cc/CMakeFiles/bpf-static.dir/bcc_proc.c.o
[ 27%] Building CXX object src/cc/CMakeFiles/bpf-static.dir/common.cc.o
[ 30%] Building CXX object src/cc/CMakeFiles/bpf-static.dir/usdt/usdt.cc.o
[ 30%] Building CXX object src/cc/CMakeFiles/bpf-static.dir/usdt/usdt_args.cc.o
[ 30%] Linking CXX static library libbcc_bpf.a
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 30%] Built target bpf-static
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target api-static
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 30%] Building CXX object src/cc/api/CMakeFiles/api-static.dir/BPF.cc.o
[ 33%] Building CXX object src/cc/api/CMakeFiles/api-static.dir/BPFTable.cc.o
[ 33%] Linking CXX static library libapi-static.a
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 33%] Built target api-static
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target usdt-static
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 33%] Building CXX object src/cc/usdt/CMakeFiles/usdt-static.dir/usdt_args.cc.o
[ 36%] Building CXX object src/cc/usdt/CMakeFiles/usdt-static.dir/usdt.cc.o
[ 36%] Linking CXX static library libusdt-static.a
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 36%] Built target usdt-static
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 38%] [FLEX][Lexer] Building scanner with flex 2.6.4
lexer.ll:110: warning, -s option given but default rule can be matched
[ 38%] [BISON][Parser] Building parser with bison 3.0.4
parser.yy:19.9-17: warning: deprecated directive, use ‘%define api.namespace ebpf::cc’ [-Wdeprecated]
%define namespace "ebpf::cc"
^^^^^^^^^
parser.yy:19.9-17: warning: %define variable 'api.namespace' requires '{...}' values [-Wdeprecated]
%define namespace "ebpf::cc"
^^^^^^^^^
parser.yy:20.9-25: warning: %define variable 'parser_class_name' requires '{...}' values [-Wdeprecated]
%define parser_class_name "BisonParser"
^^^^^^^^^^^^^^^^^
Scanning dependencies of target b_frontend
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 38%] Building CXX object src/cc/frontends/b/CMakeFiles/b_frontend.dir/loader.cc.o
[ 38%] Building CXX object src/cc/frontends/b/CMakeFiles/b_frontend.dir/codegen_llvm.cc.o
[ 41%] Building CXX object src/cc/frontends/clang/CMakeFiles/clang_frontend.dir/tp_frontend_action.cc.o
In file included from /usr/lib/llvm-6.0/include/clang/AST/RecursiveASTVisitor.h:24:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/tp_frontend_action.h:23,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/tp_frontend_action.cc:32:
/usr/lib/llvm-6.0/include/clang/AST/DeclOpenMP.h:97:1: warning: multi-line comment [-Wcomment]
/// #pragma omp declare reduction (foo : int,float : omp_out += omp_in) \
^
[ 44%] Building CXX object src/cc/frontends/b/CMakeFiles/b_frontend.dir/node.cc.o
[ 44%] Building CXX object src/cc/frontends/b/CMakeFiles/b_frontend.dir/parser.cc.o
[ 44%] Building CXX object src/cc/frontends/b/CMakeFiles/b_frontend.dir/printer.cc.o
[ 44%] Building CXX object src/cc/frontends/b/CMakeFiles/b_frontend.dir/type_check.cc.o
[ 47%] Building CXX object src/cc/frontends/b/CMakeFiles/b_frontend.dir/parser.yy.cc.o
[ 47%] Building CXX object src/cc/frontends/b/CMakeFiles/b_frontend.dir/lexer.ll.cc.o
[ 47%] Building CXX object src/cc/frontends/clang/CMakeFiles/clang_frontend.dir/kbuild_helper.cc.o
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/kbuild_helper.cc:80:3: warning: multi-line comment [-Wcomment]
// USERINCLUDE := \
^
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/kbuild_helper.cc:89:3: warning: multi-line comment [-Wcomment]
// LINUXINCLUDE := \
^
[ 47%] Building CXX object src/cc/frontends/clang/CMakeFiles/clang_frontend.dir/__/__/common.cc.o
[ 47%] Linking CXX static library libb_frontend.a
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 47%] Built target b_frontend
[ 50%] Linking CXX static library libclang_frontend.a
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 50%] Built target clang_frontend
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target bcc-shared
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target bcc-static
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 50%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/link_all.cc.o
[ 50%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/bcc_common.cc.o
[ 50%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/bcc_common.cc.o
[ 52%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/bpf_module.cc.o
[ 55%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/bpf_module.cc.o
In file included from /usr/lib/llvm-6.0/include/clang/AST/RecursiveASTVisitor.h:24:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/b_frontend_action.h:23,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bpf_module.cc:43:
/usr/lib/llvm-6.0/include/clang/AST/DeclOpenMP.h:97:1: warning: multi-line comment [-Wcomment]
/// #pragma omp declare reduction (foo : int,float : omp_out += omp_in) \
^
In file included from /usr/lib/llvm-6.0/include/clang/AST/RecursiveASTVisitor.h:24:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/frontends/clang/b_frontend_action.h:23,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bpf_module.cc:43:
/usr/lib/llvm-6.0/include/clang/AST/DeclOpenMP.h:97:1: warning: multi-line comment [-Wcomment]
/// #pragma omp declare reduction (foo : int,float : omp_out += omp_in) \
^
[ 55%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/bcc_btf.cc.o
[ 55%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/bcc_btf.cc.o
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc: In member function ‘int ebpf::BTF::get_btf_info(const char*, void**, unsigned int*, unsigned int*, void**, unsigned int*, unsigned int*)’:
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc:316:33: warning: ‘int btf_ext__reloc_func_info(const btf*, const btf_ext*, const char*, __u32, void**, __u32*)’ is deprecated: btf_ext__reloc_func_info was never meant as a public API and has wrong assumptions embedded in it; it will be removed in the future libbpf versions [-Wdeprecated-declarations]
func_info, func_info_cnt);
^
In file included from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_libbpf_inc.h:9:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc:22:
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/libbpf/src/btf.h:88:5: note: declared here
int btf_ext__reloc_func_info(const struct btf *btf,
^~~~~~~~~~~~~~~~~~~~~~~~
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc:323:33: warning: ‘int btf_ext__reloc_line_info(const btf*, const btf_ext*, const char*, __u32, void**, __u32*)’ is deprecated: btf_ext__reloc_line_info was never meant as a public API and has wrong assumptions embedded in it; it will be removed in the future libbpf versions [-Wdeprecated-declarations]
line_info, line_info_cnt);
^
In file included from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_libbpf_inc.h:9:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc:22:
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/libbpf/src/btf.h:93:5: note: declared here
int btf_ext__reloc_line_info(const struct btf *btf,
^~~~~~~~~~~~~~~~~~~~~~~~
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc: In member function ‘int ebpf::BTF::get_btf_info(const char*, void**, unsigned int*, unsigned int*, void**, unsigned int*, unsigned int*)’:
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc:316:33: warning: ‘int btf_ext__reloc_func_info(const btf*, const btf_ext*, const char*, __u32, void**, __u32*)’ is deprecated: btf_ext__reloc_func_info was never meant as a public API and has wrong assumptions embedded in it; it will be removed in the future libbpf versions [-Wdeprecated-declarations]
func_info, func_info_cnt);
^
In file included from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_libbpf_inc.h:9:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc:22:
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/libbpf/src/btf.h:88:5: note: declared here
int btf_ext__reloc_func_info(const struct btf *btf,
^~~~~~~~~~~~~~~~~~~~~~~~
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc:323:33: warning: ‘int btf_ext__reloc_line_info(const btf*, const btf_ext*, const char*, __u32, void**, __u32*)’ is deprecated: btf_ext__reloc_line_info was never meant as a public API and has wrong assumptions embedded in it; it will be removed in the future libbpf versions [-Wdeprecated-declarations]
line_info, line_info_cnt);
^
In file included from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_libbpf_inc.h:9:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/bcc_btf.cc:22:
/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/libbpf/src/btf.h:93:5: note: declared here
int btf_ext__reloc_line_info(const struct btf *btf,
^~~~~~~~~~~~~~~~~~~~~~~~
[ 55%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/exported_files.cc.o
[ 55%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/exported_files.cc.o
[ 58%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/bcc_debug.cc.o
[ 61%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/bcc_debug.cc.o
[ 61%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/bpf_module_rw_engine.cc.o
[ 61%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/bpf_module_rw_engine.cc.o
[ 61%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/table_storage.cc.o
[ 61%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/table_storage.cc.o
[ 63%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/shared_table.cc.o
[ 63%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/shared_table.cc.o
[ 63%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/bpffs_table.cc.o
[ 66%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/bpffs_table.cc.o
[ 66%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/json_map_decl_visitor.cc.o
[ 66%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/json_map_decl_visitor.cc.o
In file included from /usr/lib/llvm-6.0/include/clang/AST/RecursiveASTVisitor.h:24:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/json_map_decl_visitor.cc:22:
/usr/lib/llvm-6.0/include/clang/AST/DeclOpenMP.h:97:1: warning: multi-line comment [-Wcomment]
/// #pragma omp declare reduction (foo : int,float : omp_out += omp_in) \
^
In file included from /usr/lib/llvm-6.0/include/clang/AST/RecursiveASTVisitor.h:24:0,
from /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/src/cc/json_map_decl_visitor.cc:22:
/usr/lib/llvm-6.0/include/clang/AST/DeclOpenMP.h:97:1: warning: multi-line comment [-Wcomment]
/// #pragma omp declare reduction (foo : int,float : omp_out += omp_in) \
^
[ 66%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/common.cc.o
[ 66%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/bcc_syms.cc.o
[ 69%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/usdt/usdt.cc.o
[ 72%] Building C object src/cc/CMakeFiles/bcc-shared.dir/bcc_elf.c.o
[ 72%] Building C object src/cc/CMakeFiles/bcc-shared.dir/bcc_perf_map.c.o
[ 72%] Building C object src/cc/CMakeFiles/bcc-shared.dir/bcc_proc.c.o
[ 75%] Building CXX object src/cc/CMakeFiles/bcc-shared.dir/common.cc.o
[ 75%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/usdt/usdt_args.cc.o
[ 75%] Linking CXX shared library libbcc.so
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 75%] Built target bcc-shared
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target test_libbcc
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 77%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_libbcc.cc.o
[ 77%] Building CXX object src/cc/CMakeFiles/bcc-static.dir/bcc_syms.cc.o
[ 80%] Building C object src/cc/CMakeFiles/bcc-static.dir/bcc_elf.c.o
[ 80%] Building C object src/cc/CMakeFiles/bcc-static.dir/bcc_perf_map.c.o
[ 80%] Building C object src/cc/CMakeFiles/bcc-static.dir/bcc_proc.c.o
[ 83%] Linking CXX static library libbcc.a
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[ 83%] Built target bcc-static
[ 83%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_c_api.cc.o
[ 83%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_array_table.cc.o
[ 86%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_bpf_table.cc.o
[ 86%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_cg_storage.cc.o
[ 86%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_hash_table.cc.o
[ 86%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_map_in_map.cc.o
[ 88%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_perf_event.cc.o
[ 88%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_pinned_table.cc.o
[ 88%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_prog_table.cc.o
[ 91%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_queuestack_table.cc.o
[ 91%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_shared_table.cc.o
[ 91%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_sk_storage.cc.o
[ 94%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_sock_table.cc.o
[ 94%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_usdt_args.cc.o
[ 94%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_usdt_probes.cc.o
[ 97%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/utils.cc.o
[ 97%] Building CXX object tests/cc/CMakeFiles/test_libbcc.dir/test_parse_tracepoint.cc.o
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
Scanning dependencies of target test_static
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make[2]: Entering directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[100%] Building C object tests/cc/CMakeFiles/test_static.dir/test_static.c.o
[100%] Linking CXX executable test_static
[100%] Linking CXX executable test_libbcc
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[100%] Built target test_libbcc
make[2]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
[100%] Built target test_static
make[1]: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build'
make: Leaving directory '/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/cc'
+ ctest -V -D ExperimentalTest --no-compress-output
UpdateCTestConfiguration from :/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/DartConfiguration.tcl
Cannot find file: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/DartConfiguration.tcl
Site:
Build name: (empty)
Create new tag: 20211012-1450 - Experimental
UpdateCTestConfiguration from :/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/DartConfiguration.tcl
Cannot find file: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/DartConfiguration.tcl
Test project /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build
Constructing a list of tests
Updating test list for fixtures
Added 0 tests to meet fixture requirements
Checking test dependency graph...
Checking test dependency graph end
test 1
Start 1: style-check
1: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/scripts/c-style-check.sh
1: Test timeout computed to be: 9.99988e+06
1: diff --git a/libbpf-tools/ttysnoop.bpf.c b/libbpf-tools/ttysnoop.bpf.c
1: index d675ed0e..c1010121 100644
1: --- a/libbpf-tools/ttysnoop.bpf.c
1: +++ b/libbpf-tools/ttysnoop.bpf.c
1: @@ -1,19 +1,19 @@
1: /* SPDX-License-Identifier: GPL-2.0 */
1: /* Copyright (c) 2021 Hengqi Chen */
1: -#include <vmlinux.h>
1: -#include <bpf/bpf_helpers.h>
1: #include <bpf/bpf_core_read.h>
1: +#include <bpf/bpf_helpers.h>
1: #include <bpf/bpf_tracing.h>
1: +#include <vmlinux.h>
1: #include "ttysnoop.h"
1:
1: -#define WRITE 1
1: +#define WRITE 1
1: /**
1: * starting from linux v5.14-rc1, ITER_IOVEC has value 0 instead of 4
1: * see:
1: * https://github.com/torvalds/linux/commit/8cd54c1c8480
1: * https://github.com/torvalds/linux/blob/v5.14-rc1/include/linux/uio.h#L22
1: */
1: -#define ITER_IOVEC_v514 0
1: +#define ITER_IOVEC_v514 0
1:
1: /**
1: * starting from linux v5.14-rc1, struct iov_iter has new definition
1: @@ -23,11 +23,11 @@
1: * https://github.com/torvalds/linux/blob/v5.14-rc1/include/linux/uio.h#L30-L50
1: */
1: struct iov_iter___v514 {
1: - __u8 iter_type;
1: - bool data_source;
1: - union {
1: - const struct kvec *kvec;
1: - };
1: + __u8 iter_type;
1: + bool data_source;
1: + union {
1: + const struct kvec *kvec;
1: + };
1: };
1:
1: static int zero = 0;
1: @@ -38,111 +38,110 @@ const volatile int read_count = 16;
1: extern __u32 LINUX_KERNEL_VERSION __kconfig;
1:
1: struct {
1: - __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
1: - __uint(max_entries, 1);
1: - __type(key, int);
1: - __type(value, struct event);
1: + __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
1: + __uint(max_entries, 1);
1: + __type(key, int);
1: + __type(value, struct event);
1: } heap SEC(".maps");
1:
1: struct {
1: - __uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
1: - __uint(key_size, sizeof(__u32));
1: - __uint(value_size, sizeof(__u32));
1: + __uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
1: + __uint(key_size, sizeof(__u32));
1: + __uint(value_size, sizeof(__u32));
1: } events SEC(".maps");
1:
1: -static int probe_tty_write(void *ctx, const char *buf, size_t count)
1: -{
1: - struct event *eventp;
1: - int i;
1: +static int probe_tty_write(void *ctx, const char *buf, size_t count) {
1: + struct event *eventp;
1: + int i;
1:
1: - eventp = bpf_map_lookup_elem(&heap, &zero);
1: - if (!eventp)
1: - return 0;
1: + eventp = bpf_map_lookup_elem(&heap, &zero);
1: + if (!eventp)
1: + return 0;
1:
1: - for (i = 0; i < read_count; i++) {
1: - if (bpf_probe_read_user(eventp->buf, BUF_SIZE, buf))
1: - return 0;
1: + for (i = 0; i < read_count; i++) {
1: + if (bpf_probe_read_user(eventp->buf, BUF_SIZE, buf))
1: + return 0;
1:
1: - if (count < BUF_SIZE) {
1: - eventp->count = count;
1: - } else {
1: - eventp->count = BUF_SIZE - 1;
1: - }
1: - eventp->buf[eventp->count] = '\0';
1: - bpf_perf_event_output(ctx, &events, BPF_F_CURRENT_CPU, eventp, sizeof(*eventp));
1: + if (count < BUF_SIZE) {
1: + eventp->count = count;
1: + } else {
1: + eventp->count = BUF_SIZE - 1;
1: + }
1: + eventp->buf[eventp->count] = '\0';
1: + bpf_perf_event_output(ctx, &events, BPF_F_CURRENT_CPU, eventp,
1: + sizeof(*eventp));
1:
1: - if (count < BUF_SIZE)
1: - return 0;
1: + if (count < BUF_SIZE)
1: + return 0;
1:
1: - count -= eventp->count;
1: - buf += eventp->count;
1: - }
1: + count -= eventp->count;
1: + buf += eventp->count;
1: + }
1:
1: - return 0;
1: + return 0;
1: };
1:
1: -static int probe_entry(void *ctx, struct file *file, const char *buf, size_t count)
1: -{
1: - if (BPF_CORE_READ(file, f_inode, i_ino) != pts)
1: - return 0;
1: +static int probe_entry(void *ctx, struct file *file, const char *buf,
1: + size_t count) {
1: + if (BPF_CORE_READ(file, f_inode, i_ino) != pts)
1: + return 0;
1:
1: - return probe_tty_write(ctx, buf, count);
1: + return probe_tty_write(ctx, buf, count);
1: }
1:
1: SEC("kprobe/tty_write")
1: -int BPF_KPROBE(tty_write_entry, struct file *file, const char *buf, size_t count)
1: -{
1: - return probe_entry(ctx, file, buf, count);
1: +int BPF_KPROBE(tty_write_entry, struct file *file, const char *buf,
1: + size_t count) {
1: + return probe_entry(ctx, file, buf, count);
1: }
1:
1: SEC("fentry/tty_write")
1: -int BPF_PROG(tty_write_fentry)
1: -{
1: - struct iov_iter___v514 *from_v514;
1: - struct iov_iter *from;
1: - struct kiocb *iocb;
1: - struct file * file;
1: - const char *buf;
1: - size_t count;
1: -
1: - /**
1: - * commit 9bb48c82aced (v5.11-rc4) tty: implement write_iter
1: - * changed arguments of tty_write function
1: - */
1: - if (LINUX_KERNEL_VERSION < KERNEL_VERSION(5, 11, 0)) {
1: - file = (struct file *)ctx[0];
1: - buf = (const char *)ctx[1];
1: - count = (size_t)ctx[2];
1: - return probe_entry(ctx, file, buf, count);
1: - }
1: -
1: - iocb = (struct kiocb *)ctx[0];
1: - if (BPF_CORE_READ(iocb, ki_filp, f_inode, i_ino) != pts)
1: - return 0;
1: -
1: - /**
1: - * commit 8cd54c1c8480 iov_iter: separate direction from flavour
1: - * `type` is represented by iter_type and data_source seperately
1: - */
1: - from_v514 = (struct iov_iter___v514 *)ctx[1];
1: - if (bpf_core_field_exists(from_v514->iter_type)) {
1: - if (BPF_CORE_READ(from_v514, iter_type) != ITER_IOVEC_v514)
1: - return 0;
1: - if (BPF_CORE_READ(from_v514, data_source) != WRITE)
1: - return 0;
1: -
1: - buf = BPF_CORE_READ(from_v514, kvec, iov_base);
1: - count = BPF_CORE_READ(from_v514, kvec, iov_len);
1: - return probe_tty_write(ctx, buf, count);
1: - }
1: -
1: - from = (struct iov_iter *)ctx[1];
1: - if (BPF_CORE_READ(from, type) != (ITER_IOVEC + WRITE))
1: - return 0;
1: -
1: - buf = BPF_CORE_READ(from, kvec, iov_base);
1: - count = BPF_CORE_READ(from, kvec, iov_len);
1: - return probe_tty_write(ctx, buf, count);
1: +int BPF_PROG(tty_write_fentry) {
1: + struct iov_iter___v514 *from_v514;
1: + struct iov_iter *from;
1: + struct kiocb *iocb;
1: + struct file *file;
1: + const char *buf;
1: + size_t count;
1: +
1: + /**
1: + * commit 9bb48c82aced (v5.11-rc4) tty: implement write_iter
1: + * changed arguments of tty_write function
1: + */
1: + if (LINUX_KERNEL_VERSION < KERNEL_VERSION(5, 11, 0)) {
1: + file = (struct file *)ctx[0];
1: + buf = (const char *)ctx[1];
1: + count = (size_t)ctx[2];
1: + return probe_entry(ctx, file, buf, count);
1: + }
1: +
1: + iocb = (struct kiocb *)ctx[0];
1: + if (BPF_CORE_READ(iocb, ki_filp, f_inode, i_ino) != pts)
1: + return 0;
1: +
1: + /**
1: + * commit 8cd54c1c8480 iov_iter: separate direction from flavour
1: + * `type` is represented by iter_type and data_source seperately
1: + */
1: + from_v514 = (struct iov_iter___v514 *)ctx[1];
1: + if (bpf_core_field_exists(from_v514->iter_type)) {
1: + if (BPF_CORE_READ(from_v514, iter_type) != ITER_IOVEC_v514)
1: + return 0;
1: + if (BPF_CORE_READ(from_v514, data_source) != WRITE)
1: + return 0;
1: +
1: + buf = BPF_CORE_READ(from_v514, kvec, iov_base);
1: + count = BPF_CORE_READ(from_v514, kvec, iov_len);
1: + return probe_tty_write(ctx, buf, count);
1: + }
1: +
1: + from = (struct iov_iter *)ctx[1];
1: + if (BPF_CORE_READ(from, type) != (ITER_IOVEC + WRITE))
1: + return 0;
1: +
1: + buf = BPF_CORE_READ(from, kvec, iov_base);
1: + count = BPF_CORE_READ(from, kvec, iov_len);
1: + return probe_tty_write(ctx, buf, count);
1: }
1:
1: char LICENSE[] SEC("license") = "Dual BSD/GPL";
1: diff --git a/libbpf-tools/ttysnoop.c b/libbpf-tools/ttysnoop.c
1: index 58a36c57..3f73be90 100644
1: --- a/libbpf-tools/ttysnoop.c
1: +++ b/libbpf-tools/ttysnoop.c
1: @@ -12,19 +12,19 @@
1: #include <errno.h>
1: #include <signal.h>
1: #include <string.h>
1: -#include <time.h>
1: -#include <sys/types.h>
1: #include <sys/stat.h>
1: +#include <sys/types.h>
1: +#include <time.h>
1: #include <unistd.h>
1:
1: -#include <bpf/libbpf.h>
1: #include <bpf/bpf.h>
1: +#include <bpf/libbpf.h>
1: +#include "trace_helpers.h"
1: #include "ttysnoop.h"
1: #include "ttysnoop.skel.h"
1: -#include "trace_helpers.h"
1:
1: -#define PERF_BUFFER_PAGES 64
1: -#define PERF_POLL_TIMEOUT_MS 100
1: +#define PERF_BUFFER_PAGES 64
1: +#define PERF_POLL_TIMEOUT_MS 100
1: #define warn(...) fprintf(stderr, __VA_ARGS__)
1:
1: static volatile sig_atomic_t exiting = 0;
1: @@ -36,186 +36,185 @@ static int read_count = 16;
1:
1: const char *argp_program_version = "ttysnoop 0.1";
1: const char *argp_program_bug_address =
1: - "https://github.com/iovisor/bcc/tree/master/libbpf-tools";
1: + "https://github.com/iovisor/bcc/tree/master/libbpf-tools";
1: const char argp_program_doc[] =
1: -"Watch live output from a tty or pts device.\n"
1: -"\n"
1: -"USAGE: ttysnoop [-h] [-C] [-s SIZE] [-c COUNT] DEVICE\n"
1: -"\n"
1: -"EXAMPLES:\n"
1: -" ttysnoop /dev/pts/2 # snoop output from /dev/pts/2\n"
1: -" ttysnoop 2 # snoop output from /dev/pts/2 (shortcut)\n"
1: -" ttysnoop /dev/console # snoop output from the system console\n"
1: -" ttysnoop /dev/tty0 # snoop output from /dev/tty0\n"
1: -" ttysnoop 2 -s 1024 # snoop output from /dev/pts/2 with data size 1024\n"
1: -" ttysnoop 2 -c 2 # snoop output from /dev/pts/2 with 2 checks for 256"
1: -" bytes of data in buffer (potentially retrieving 512 bytes)\n";
1: + "Watch live output from a tty or pts device.\n"
1: + "\n"
1: + "USAGE: ttysnoop [-h] [-C] [-s SIZE] [-c COUNT] DEVICE\n"
1: + "\n"
1: + "EXAMPLES:\n"
1: + " ttysnoop /dev/pts/2 # snoop output from /dev/pts/2\n"
1: + " ttysnoop 2 # snoop output from /dev/pts/2 (shortcut)\n"
1: + " ttysnoop /dev/console # snoop output from the system console\n"
1: + " ttysnoop /dev/tty0 # snoop output from /dev/tty0\n"
1: + " ttysnoop 2 -s 1024 # snoop output from /dev/pts/2 with data size "
1: + "1024\n"
1: + " ttysnoop 2 -c 2 # snoop output from /dev/pts/2 with 2 checks "
1: + "for 256"
1: + " bytes of data in buffer (potentially retrieving 512 bytes)\n";
1:
1: static const struct argp_option opts[] = {
1: - { "noclear", 'C', NULL, 0, "Don't clear the screen" },
1: - { "datasize", 's', "SIZE", 0, "size of the transmitting buffer (default 256)" },
1: - { "datacount", 'c', "COUNT", 0, "number of times we check for 'data-size' data (default 16)" },
1: - { NULL, 'h', NULL, OPTION_HIDDEN, "Show the full help" },
1: - {},
1: + {"noclear", 'C', NULL, 0, "Don't clear the screen"},
1: + {"datasize", 's', "SIZE", 0,
1: + "size of the transmitting buffer (default 256)"},
1: + {"datacount", 'c', "COUNT", 0,
1: + "number of times we check for 'data-size' data (default 16)"},
1: + {NULL, 'h', NULL, OPTION_HIDDEN, "Show the full help"},
1: + {},
1: };
1:
1: -static error_t parse_arg(int key, char *arg, struct argp_state *state)
1: -{
1: - struct stat statbuf;
1: - char path[PATH_MAX];
1: - long num;
1: -
1: - switch (key) {
1: - case 'C':
1: - clear_screen = false;
1: - break;
1: - case 's':
1: - errno = 0;
1: - num = strtol(arg, NULL, 10);
1: - if (errno || num <= 0) {
1: - warn("Invalid data size: %s\n", arg);
1: - argp_usage(state);
1: - }
1: - read_bytes = num;
1: - break;
1: - case 'c':
1: - errno = 0;
1: - num = strtol(arg, NULL, 10);
1: - if (errno || num <= 0) {
1: - warn("Invalid data count: %s\n", arg);
1: - argp_usage(state);
1: - }
1: - read_count = num;
1: - break;
1: - case 'h':
1: - argp_state_help(state, stderr, ARGP_HELP_STD_HELP);
1: - break;
1: - case ARGP_KEY_ARG:
1: - if (pts != -1) {
1: - warn("Too many devices\n");
1: - argp_usage(state);
1: - }
1: - if (arg[0] != '/')
1: - snprintf(path, sizeof(path), "/dev/pts/%s", arg);
1: - else
1: - strcpy(path, arg);
1: - if (stat(path, &statbuf) < 0) {
1: - warn("Wrong device\n");
1: - argp_usage(state);
1: - }
1: - pts = statbuf.st_ino;
1: - break;
1: - case ARGP_KEY_END:
1: - if (pts == -1) {
1: - warn("Device required\n");
1: - argp_usage(state);
1: - }
1: - break;
1: - default:
1: - return ARGP_ERR_UNKNOWN;
1: - }
1: - return 0;
1: +static error_t parse_arg(int key, char *arg, struct argp_state *state) {
1: + struct stat statbuf;
1: + char path[PATH_MAX];
1: + long num;
1: +
1: + switch (key) {
1: + case 'C':
1: + clear_screen = false;
1: + break;
1: + case 's':
1: + errno = 0;
1: + num = strtol(arg, NULL, 10);
1: + if (errno || num <= 0) {
1: + warn("Invalid data size: %s\n", arg);
1: + argp_usage(state);
1: + }
1: + read_bytes = num;
1: + break;
1: + case 'c':
1: + errno = 0;
1: + num = strtol(arg, NULL, 10);
1: + if (errno || num <= 0) {
1: + warn("Invalid data count: %s\n", arg);
1: + argp_usage(state);
1: + }
1: + read_count = num;
1: + break;
1: + case 'h':
1: + argp_state_help(state, stderr, ARGP_HELP_STD_HELP);
1: + break;
1: + case ARGP_KEY_ARG:
1: + if (pts != -1) {
1: + warn("Too many devices\n");
1: + argp_usage(state);
1: + }
1: + if (arg[0] != '/')
1: + snprintf(path, sizeof(path), "/dev/pts/%s", arg);
1: + else
1: + strcpy(path, arg);
1: + if (stat(path, &statbuf) < 0) {
1: + warn("Wrong device\n");
1: + argp_usage(state);
1: + }
1: + pts = statbuf.st_ino;
1: + break;
1: + case ARGP_KEY_END:
1: + if (pts == -1) {
1: + warn("Device required\n");
1: + argp_usage(state);
1: + }
1: + break;
1: + default:
1: + return ARGP_ERR_UNKNOWN;
1: + }
1: + return 0;
1: }
1:
1: -static void sig_int(int signo)
1: -{
1: - exiting = 1;
1: -}
1: +static void sig_int(int signo) { exiting = 1; }
1:
1: -static void handle_event(void *ctx, int cpu, void *data, __u32 data_sz)
1: -{
1: - struct event *e = data;
1: +static void handle_event(void *ctx, int cpu, void *data, __u32 data_sz) {
1: + struct event *e = data;
1:
1: - printf("%s", e->buf);
1: + printf("%s", e->buf);
1: }
1:
1: -static void handle_lost_events(void *ctx, int cpu, __u64 lost_cnt)
1: -{
1: - warn("lost %llu events on CPU #%d\n", lost_cnt, cpu);
1: +static void handle_lost_events(void *ctx, int cpu, __u64 lost_cnt) {
1: + warn("lost %llu events on CPU #%d\n", lost_cnt, cpu);
1: }
1:
1: -int main(int argc, char **argv)
1: -{
1: - static const struct argp argp = {
1: - .options = opts,
1: - .parser = parse_arg,
1: - .doc = argp_program_doc,
1: - };
1: - struct perf_buffer_opts pb_opts;
1: - struct perf_buffer *pb = NULL;
1: - struct ttysnoop_bpf *obj;
1: - int err;
1: -
1: - err = argp_parse(&argp, argc, argv, 0, NULL, NULL);
1: - if (err)
1: - return err;
1: -
1: - err = bump_memlock_rlimit();
1: - if (err) {
1: - warn("failed to increase rlimit: %d\n", err);
1: - return 1;
1: - }
1: -
1: - obj = ttysnoop_bpf__open();
1: - if (!obj) {
1: - warn("failed to open BPF object\n");
1: - return 1;
1: - }
1: -
1: - obj->rodata->pts = pts;
1: - obj->rodata->read_bytes = read_bytes >= BUF_SIZE ? (BUF_SIZE - 1) : read_bytes;
1: - obj->rodata->read_count = read_count;
1: -
1: - if (fentry_exists("tty_write", NULL))
1: - bpf_program__set_autoload(obj->progs.tty_write_entry, false);
1: - else
1: - bpf_program__set_autoload(obj->progs.tty_write_fentry, false);
1: -
1: - err = ttysnoop_bpf__load(obj);
1: - if (err) {
1: - warn("failed to load BPF object: %d\n", err);
1: - goto cleanup;
1: - }
1: -
1: - err = ttysnoop_bpf__attach(obj);
1: - if (err) {
1: - warn("failed to attach BPF programs: %d\n", err);
1: - goto cleanup;
1: - }
1: -
1: - pb_opts.sample_cb = handle_event;
1: - pb_opts.lost_cb = handle_lost_events;
1: - pb = perf_buffer__new(bpf_map__fd(obj->maps.events), PERF_BUFFER_PAGES, &pb_opts);
1: - err = libbpf_get_error(pb);
1: - if (err) {
1: - warn("failed to open perf buffer: %d\n", err);
1: - goto cleanup;
1: - }
1: -
1: - if (signal(SIGINT, sig_int) == SIG_ERR) {
1: - warn("can't set signal handler: %s\n", strerror(errno));
1: - goto cleanup;
1: - }
1: -
1: - if (clear_screen) {
1: - err = system("clear");
1: - if (err)
1: - goto cleanup;
1: - }
1: -
1: - while (!exiting) {
1: - err = perf_buffer__poll(pb, PERF_POLL_TIMEOUT_MS);
1: - if (err < 0 && errno != EINTR) {
1: - warn("error polling perf buffer: %s\n", strerror(errno));
1: - goto cleanup;
1: - }
1: - /* reset err to return 0 if exiting */
1: - err = 0;
1: - }
1: +int main(int argc, char **argv) {
1: + static const struct argp argp = {
1: + .options = opts,
1: + .parser = parse_arg,
1: + .doc = argp_program_doc,
1: + };
1: + struct perf_buffer_opts pb_opts;
1: + struct perf_buffer *pb = NULL;
1: + struct ttysnoop_bpf *obj;
1: + int err;
1: +
1: + err = argp_parse(&argp, argc, argv, 0, NULL, NULL);
1: + if (err)
1: + return err;
1: +
1: + err = bump_memlock_rlimit();
1: + if (err) {
1: + warn("failed to increase rlimit: %d\n", err);
1: + return 1;
1: + }
1: +
1: + obj = ttysnoop_bpf__open();
1: + if (!obj) {
1: + warn("failed to open BPF object\n");
1: + return 1;
1: + }
1: +
1: + obj->rodata->pts = pts;
1: + obj->rodata->read_bytes =
1: + read_bytes >= BUF_SIZE ? (BUF_SIZE - 1) : read_bytes;
1: + obj->rodata->read_count = read_count;
1: +
1: + if (fentry_exists("tty_write", NULL))
1: + bpf_program__set_autoload(obj->progs.tty_write_entry, false);
1: + else
1: + bpf_program__set_autoload(obj->progs.tty_write_fentry, false);
1: +
1: + err = ttysnoop_bpf__load(obj);
1: + if (err) {
1: + warn("failed to load BPF object: %d\n", err);
1: + goto cleanup;
1: + }
1: +
1: + err = ttysnoop_bpf__attach(obj);
1: + if (err) {
1: + warn("failed to attach BPF programs: %d\n", err);
1: + goto cleanup;
1: + }
1: +
1: + pb_opts.sample_cb = handle_event;
1: + pb_opts.lost_cb = handle_lost_events;
1: + pb = perf_buffer__new(bpf_map__fd(obj->maps.events), PERF_BUFFER_PAGES,
1: + &pb_opts);
1: + err = libbpf_get_error(pb);
1: + if (err) {
1: + warn("failed to open perf buffer: %d\n", err);
1: + goto cleanup;
1: + }
1: +
1: + if (signal(SIGINT, sig_int) == SIG_ERR) {
1: + warn("can't set signal handler: %s\n", strerror(errno));
1: + goto cleanup;
1: + }
1: +
1: + if (clear_screen) {
1: + err = system("clear");
1: + if (err)
1: + goto cleanup;
1: + }
1: +
1: + while (!exiting) {
1: + err = perf_buffer__poll(pb, PERF_POLL_TIMEOUT_MS);
1: + if (err < 0 && errno != EINTR) {
1: + warn("error polling perf buffer: %s\n", strerror(errno));
1: + goto cleanup;
1: + }
1: + /* reset err to return 0 if exiting */
1: + err = 0;
1: + }
1:
1: cleanup:
1: - perf_buffer__free(pb);
1: - ttysnoop_bpf__destroy(obj);
1: + perf_buffer__free(pb);
1: + ttysnoop_bpf__destroy(obj);
1:
1: - return err != 0;
1: + return err != 0;
1: }
1: diff --git a/libbpf-tools/ttysnoop.h b/libbpf-tools/ttysnoop.h
1: index c8da3d50..54c71cee 100644
1: --- a/libbpf-tools/ttysnoop.h
1: +++ b/libbpf-tools/ttysnoop.h
1: @@ -2,11 +2,11 @@
1: #ifndef __TTYSNOOP_H
1: #define __TTYSNOOP_H
1:
1: -#define BUF_SIZE 4096
1: +#define BUF_SIZE 4096
1:
1: struct event {
1: - size_t count;
1: - char buf[BUF_SIZE];
1: + size_t count;
1: + char buf[BUF_SIZE];
1: };
1:
1: #endif /* __TTYSNOOP_H */
1: Ignoring changes in the following files (wrong extension):
1: libbpf-tools/Makefile
1: libbpf-tools/.gitignore
1: Running clang-format on the following files:
1: libbpf-tools/ttysnoop.bpf.c
1: libbpf-tools/ttysnoop.h
1: libbpf-tools/ttysnoop.c
1: old tree: 1e6e04a2db8947498c4e1d4743cfeeb7b85deb92
1: new tree: 8711d87e6e03b1a3ce7d8089a362156ac872d00f
1/47 Test #1: style-check ...................... Passed 1.23 sec
test 2
Start 2: c_test_static
2: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "c_test_static" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/cc/test_static"
2: Test timeout computed to be: 9.99988e+06
2: clang -cc1 -triple x86_64-unknown-linux-gnu -emit-llvm-bc -emit-llvm-uselists -disable-free -disable-llvm-verifier -discard-value-names -main-file-name main.c -mrelocation-model static -mthread-model posix -fno-jump-tables -fmath-errno -masm-verbose -mconstructor-aliases -fuse-init-array -target-cpu x86-64 -dwarf-column-info -debugger-tuning=gdb -momit-leaf-frame-pointer -coverage-notes-file /usr/src/linux-headers-4.15.0-1009-gcp/main.gcno -nostdsysteminc -nobuiltininc -resource-dir lib/clang/6.0.0 -isystem /virtual/lib/clang/include -include ./include/linux/kconfig.h -include /virtual/include/bcc/bpf.h -include /virtual/include/bcc/bpf_workaround.h -include /virtual/include/bcc/helpers.h -isystem /virtual/include -I /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/cc -D __BPF_TRACING__ -I arch/x86/include/ -I arch/x86/include/generated -I include -I arch/x86/include/uapi -I arch/x86/include/generated/uapi -I include/uapi -I include/generated/uapi -D __KERNEL__ -D KBUILD_MODNAME="bcc" -O2 -Wno-deprecated-declarations -Wno-gnu-variable-sized-type-not-at-end -Wno-pragma-once-outside-header -Wno-address-of-packed-member -Wno-unknown-warning-option -Wno-unused-value -Wno-pointer-sign -fdebug-compilation-dir /usr/src/linux-headers-4.15.0-1009-gcp -ferror-limit 19 -fmessage-length 0 -fobjc-runtime=gcc -fdiagnostics-show-option -vectorize-loops -vectorize-slp -o main.bc -x c /virtual/main.c
2: #if defined(BPF_LICENSE)
2: #error BPF_LICENSE cannot be specified through cflags
2: #endif
2: #if !defined(CONFIG_CC_STACKPROTECTOR)
2: #if defined(CONFIG_CC_STACKPROTECTOR_AUTO) \
2: || defined(CONFIG_CC_STACKPROTECTOR_REGULAR) \
2: || defined(CONFIG_CC_STACKPROTECTOR_STRONG)
2: #define CONFIG_CC_STACKPROTECTOR
2: #endif
2: #endif
2: #define bpf_probe_read_kernel bpf_probe_read
2: #define bpf_probe_read_kernel_str bpf_probe_read_str
2: #define bpf_probe_read_user bpf_probe_read
2: #define bpf_probe_read_user_str bpf_probe_read_str
2: BPF_TABLE("array", int, int, stats, 10);
2:
2: #include <bcc/footer.h>
2: Running from kernel directory at: /lib/modules/4.15.0-1009-gcp/build
2/47 Test #2: c_test_static .................... Passed 1.19 sec
test 3
Start 3: test_libbcc
3: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "c_test_all" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/cc/test_libbcc"
3: Test timeout computed to be: 9.99988e+06
3: Parse error:
3: 4@i%ra+1r
3: -------^
3: unshare: failed to execute ruby: No such file or directory
3:
3: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3: test_libbcc is a Catch v1.4.0 host application.
3: Run with -? for options
3:
3: -------------------------------------------------------------------------------
3: test probing running Ruby process in namespaces
3: in separate mount namespace
3: -------------------------------------------------------------------------------
3: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/cc/test_usdt_probes.cc:352
3: ...............................................................................
3:
3: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/cc/test_usdt_probes.cc:367: FAILED:
3: REQUIRE( res.msg() == "" )
3: with expansion:
3: "Unable to load USDT ruby:gc__mark__begin from binary PID 7628 for probe
3: on_event"
3: ==
3: ""
3:
3: unshare: unrecognized option '--kill-child'
3: Try 'unshare --help' for more information.
3: -------------------------------------------------------------------------------
3: test probing running Ruby process in namespaces
3: in separate mount namespace and separate PID namespace
3: -------------------------------------------------------------------------------
3: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/cc/test_usdt_probes.cc:352
3: ...............................................................................
3:
3: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/cc/test_usdt_probes.cc:393: FAILED:
3: REQUIRE( res.msg() == "" )
3: with expansion:
3: "No valid Binary Path or PID provided"
3: ==
3: ""
3:
3: ===============================================================================
3: test cases: 41 | 40 passed | 1 failed as expected
3: assertions: 668 | 666 passed | 2 failed as expected
3:
3/47 Test #3: test_libbcc ...................... Passed 15.65 sec
test 4
Start 4: py_test_stat1_b
4: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_stat1_b" "namespace" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_stat1.py" "test_stat1.b" "proto.b"
4: Test timeout computed to be: 9.99988e+06
4: Actual changes:
4: tx-checksumming: off
4: tx-checksum-ip-generic: off
4: tx-checksum-sctp: off
4: tcp-segmentation-offload: off
4: tx-tcp-segmentation: off [requested on]
4: tx-tcp-ecn-segmentation: off [requested on]
4: tx-tcp-mangleid-segmentation: off [requested on]
4: tx-tcp6-segmentation: off [requested on]
4: .PING 172.16.1.1 (172.16.1.1) 56(84) bytes of data.
4: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4: --- 172.16.1.1 ping statistics ---
4: 100 packets transmitted, 100 received, 0% packet loss, time 2ms
4: rtt min/avg/max/mdev = 0.007/0.010/0.152/0.015 ms, ipg/ewma 0.026/0.008 ms
4: .
4: ----------------------------------------------------------------------
4: Ran 2 tests in 0.524s
4:
4: OK
4/47 Test #4: py_test_stat1_b .................. Passed 1.42 sec
test 5
Start 5: py_test_bpf_log
5: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_bpf_prog" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_bpf_log.py"
5: Test timeout computed to be: 9.99988e+06
5/47 Test #5: py_test_bpf_log .................. Passed 1.56 sec
test 6
Start 6: py_test_stat1_c
6: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_stat1_c" "namespace" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_stat1.py" "test_stat1.c"
6: Test timeout computed to be: 9.99988e+06
6: Actual changes:
6: tx-checksumming: off
6: tx-checksum-ip-generic: off
6: tx-checksum-sctp: off
6: tcp-segmentation-offload: off
6: tx-tcp-segmentation: off [requested on]
6: tx-tcp-ecn-segmentation: off [requested on]
6: tx-tcp-mangleid-segmentation: off [requested on]
6: tx-tcp6-segmentation: off [requested on]
6: .PING 172.16.1.1 (172.16.1.1) 56(84) bytes of data.
6: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6: --- 172.16.1.1 ping statistics ---
6: 100 packets transmitted, 100 received, 0% packet loss, time 1ms
6: rtt min/avg/max/mdev = 0.005/0.008/0.138/0.013 ms, ipg/ewma 0.019/0.007 ms
6: .
6: ----------------------------------------------------------------------
6: Ran 2 tests in 0.519s
6:
6: OK
6/47 Test #6: py_test_stat1_c .................. Passed 0.93 sec
test 7
Start 7: py_test_xlate1_c
7: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_xlate1_c" "namespace" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_xlate1.py" "test_xlate1.c"
7: Test timeout computed to be: 9.99988e+06
7: Actual changes:
7: tx-checksumming: off
7: tx-checksum-ip-generic: off
7: tx-checksum-sctp: off
7: tcp-segmentation-offload: off
7: tx-tcp-segmentation: off [requested on]
7: tx-tcp-ecn-segmentation: off [requested on]
7: tx-tcp-mangleid-segmentation: off [requested on]
7: tx-tcp6-segmentation: off [requested on]
7: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
7: 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.106 ms
7:
7: --- 192.168.1.1 ping statistics ---
7: 1 packets transmitted, 1 received, 0% packet loss, time 0ms
7: rtt min/avg/max/mdev = 0.106/0.106/0.106/0.000 ms
7: .
7: ----------------------------------------------------------------------
7: Ran 1 test in 0.320s
7:
7: OK
7/47 Test #7: py_test_xlate1_c ................. Passed 1.08 sec
test 8
Start 8: py_test_call1
8: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_call1_c" "namespace" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_call1.py" "test_call1.c"
8: Test timeout computed to be: 9.99988e+06
8: Actual changes:
8: tx-checksumming: off
8: tx-checksum-ip-generic: off
8: tx-checksum-sctp: off
8: tcp-segmentation-offload: off
8: tx-tcp-segmentation: off [requested on]
8: tx-tcp-ecn-segmentation: off [requested on]
8: tx-tcp-mangleid-segmentation: off [requested on]
8: tx-tcp6-segmentation: off [requested on]
8: .
8: ----------------------------------------------------------------------
8: Ran 1 test in 0.263s
8:
8: OK
8/47 Test #8: py_test_call1 .................... Passed 1.04 sec
test 9
Start 9: py_test_trace1
9: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_trace1" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_trace1.py" "test_trace1.b" "kprobe.b"
9: Test timeout computed to be: 9.99988e+06
9: .
9: ----------------------------------------------------------------------
9: Ran 1 test in 0.390s
9:
9: OK
9: ('fd 8:', 'stat1 1', 'stat2 1')
9: ('fd ffff8c17152e7600:', 'stat1 2', 'stat2 0')
9: ('fd 9:', 'stat1 200', 'stat2 100')
9: ('fd 7:', 'stat1 0', 'stat2 1')
9/47 Test #9: py_test_trace1 ................... Passed 0.61 sec
test 10
Start 10: py_test_trace2
10: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_trace2" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_trace2.py"
10: Test timeout computed to be: 9.99988e+06
10: .
10: ----------------------------------------------------------------------
10: Ran 1 test in 3.511s
10:
10: OK
10: ('ptr ffff8c171515ae80:', 'stat1 (0 1)')
10: ('ptr ffff8c17147145c0:', 'stat1 (0 100)')
10: ('ptr ffff8c17125d0000:', 'stat1 (0 4)')
10: ('ptr ffff8c1712608000:', 'stat1 (0 4)')
10: ('ptr ffff8c1713c38000:', 'stat1 (0 1)')
10: ('ptr ffff8c17169cdd00:', 'stat1 (0 3)')
10: ('ptr ffff8c16e11a0000:', 'stat1 (0 10)')
10: ('ptr ffff8c17169e5d00:', 'stat1 (0 3)')
10: ('ptr ffff8c17011ddd00:', 'stat1 (0 1)')
10: ('ptr ffff8c1716a0ae80:', 'stat1 (0 119)')
10: ('ptr ffff8c1715159740:', 'stat1 (0 1)')
10: ('ptr ffff8c171260dd00:', 'stat1 (0 1)')
10: ('ptr ffff8c16fe9e5d00:', 'stat1 (0 21)')
10: ('ptr ffffffffa1a12480:', 'stat1 (0 32)')
10: ('ptr ffff8c1712a70000:', 'stat1 (0 5)')
10: ('ptr ffff8c17125a45c0:', 'stat1 (0 1)')
10/47 Test #10: py_test_trace2 ................... Passed 3.62 sec
test 11
Start 11: py_test_trace3_c
11: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_trace3_c" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_trace3.py" "test_trace3.c"
11: Test timeout computed to be: 9.99988e+06
11: 1024+0 records in
11: 1024+0 records out
11: 4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.00418908 s, 1.0 GB/s
11: 1024+0 records in
11: 1024+0 records out
11: 4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.00488437 s, 859 MB/s
11: ('latency 0:', 'count 0')
11: ('latency 1:', 'count 0')
11: ('latency 2:', 'count 0')
11: ('latency 3:', 'count 0')
11: ('latency 4:', 'count 0')
11: ('latency 5:', 'count 0')
11: ('latency 6:', 'count 0')
11: ('latency 7:', 'count 0')
11: ('latency 8:', 'count 0')
11: ('latency 9:', 'count 0')
11: ('latency 10:', 'count 0')
11: ('latency 11:', 'count 0')
11: ('latency 12:', 'count 0')
11: ('latency 13:', 'count 0')
11: ('latency 14:', 'count 0')
11: ('latency 15:', 'count 0')
11: ('latency 16:', 'count 0')
11: ('latency 17:', 'count 0')
11: ('latency 18:', 'count 0')
11: ('latency 19:', 'count 0')
11: ('latency 20:', 'count 0')
11: ('latency 21:', 'count 0')
11: ('latency 22:', 'count 0')
11: ('latency 23:', 'count 0')
11: ('latency 24:', 'count 0')
11: ('latency 25:', 'count 0')
11: ('latency 26:', 'count 0')
11: ('latency 27:', 'count 0')
11: ('latency 28:', 'count 0')
11: ('latency 29:', 'count 0')
11: ('latency 30:', 'count 0')
11: ('latency 31:', 'count 0')
11: ('latency 32:', 'count 0')
11: ('latency 33:', 'count 0')
11: ('latency 34:', 'count 0')
11: ('latency 35:', 'count 0')
11: ('latency 36:', 'count 0')
11: ('latency 37:', 'count 0')
11: ('latency 38:', 'count 0')
11: ('latency 39:', 'count 0')
11: ('latency 40:', 'count 0')
11: ('latency 41:', 'count 0')
11: ('latency 42:', 'count 0')
11: ('latency 43:', 'count 0')
11: ('latency 44:', 'count 0')
11: ('latency 45:', 'count 0')
11: ('latency 46:', 'count 0')
11: ('latency 47:', 'count 0')
11: ('latency 48:', 'count 0')
11: ('latency 49:', 'count 0')
11: ('latency 50:', 'count 0')
11: ('latency 51:', 'count 0')
11: ('latency 52:', 'count 0')
11: ('latency 53:', 'count 0')
11: ('latency 54:', 'count 0')
11: ('latency 55:', 'count 0')
11: ('latency 56:', 'count 0')
11: ('latency 57:', 'count 0')
11: ('latency 58:', 'count 0')
11: ('latency 59:', 'count 0')
11: ('latency 60:', 'count 0')
11: ('latency 61:', 'count 0')
11: ('latency 62:', 'count 0')
11: ('latency 63:', 'count 0')
11: ('latency 64:', 'count 0')
11: ('latency 65:', 'count 0')
11: ('latency 66:', 'count 0')
11: ('latency 67:', 'count 0')
11: ('latency 68:', 'count 0')
11: ('latency 69:', 'count 0')
11: ('latency 70:', 'count 0')
11: ('latency 71:', 'count 0')
11: ('latency 72:', 'count 0')
11: ('latency 73:', 'count 0')
11: ('latency 74:', 'count 0')
11: ('latency 75:', 'count 0')
11: ('latency 76:', 'count 0')
11: ('latency 77:', 'count 0')
11: ('latency 78:', 'count 0')
11: ('latency 79:', 'count 0')
11: ('latency 80:', 'count 0')
11: ('latency 81:', 'count 0')
11: ('latency 82:', 'count 0')
11: ('latency 83:', 'count 0')
11: ('latency 84:', 'count 0')
11: ('latency 85:', 'count 0')
11: ('latency 86:', 'count 0')
11: ('latency 87:', 'count 0')
11: ('latency 88:', 'count 0')
11: ('latency 89:', 'count 0')
11: ('latency 90:', 'count 0')
11: ('latency 91:', 'count 0')
11: ('latency 92:', 'count 0')
11: ('latency 93:', 'count 0')
11: ('latency 94:', 'count 0')
11: ('latency 95:', 'count 0')
11: ('latency 96:', 'count 0')
11: ('latency 97:', 'count 0')
11: ('latency 98:', 'count 0')
11: ('latency 99:', 'count 0')
11: .
11: ----------------------------------------------------------------------
11: Ran 1 test in 1.964s
11:
11: OK
11/47 Test #11: py_test_trace3_c ................. Passed 2.17 sec
test 12
Start 12: py_test_trace4
12: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_trace4" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_trace4.py"
12: Test timeout computed to be: 9.99988e+06
12: ..
12: ----------------------------------------------------------------------
12: Ran 2 tests in 1.450s
12:
12: OK
12/47 Test #12: py_test_trace4 ................... Passed 1.66 sec
test 13
Start 13: py_test_trace_maxactive
13: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_trace_maxactive" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_trace_maxactive.py"
13: Test timeout computed to be: 9.99988e+06
13: .
13: ----------------------------------------------------------------------
13: Ran 1 test in 0.941s
13:
13: OK
13/47 Test #13: py_test_trace_maxactive .......... Passed 1.10 sec
test 14
Start 14: py_test_probe_count
14: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_probe_count" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_probe_count.py"
14: Test timeout computed to be: 9.99988e+06
14: ...cannot attach kprobe, probe entry may not exist
14: ...
14: ----------------------------------------------------------------------
14: Ran 6 tests in 5.500s
14:
14: OK
14/47 Test #14: py_test_probe_count .............. Passed 5.55 sec
test 15
Start 15: py_test_debuginfo
15: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_debuginfo" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_debuginfo.py"
15: Test timeout computed to be: 9.99988e+06
15: ......
15: ----------------------------------------------------------------------
15: Ran 6 tests in 0.544s
15:
15: OK
15/47 Test #15: py_test_debuginfo ................ Passed 0.66 sec
test 16
Start 16: py_test_brb
16: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_brb_c" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_brb.py" "test_brb.c"
16: Test timeout computed to be: 9.99988e+06
16: net.ipv4.ip_forward = 1
16: ARPING 100.1.1.254
16: 42 bytes from be:24:a8:76:5b:e8 (100.1.1.254): index=0 time=8.645 usec
16:
16: --- 100.1.1.254 statistics ---
16: 1 packets transmitted, 1 packets received, 0% unanswered (0 extra)
16: rtt min/avg/max/std-dev = 0.009/0.009/0.009/0.000 ms
16: ARPING 200.1.1.254
16: 42 bytes from 6e:7d:2e:e6:84:64 (200.1.1.254): index=0 time=8.422 usec
16:
16: --- 200.1.1.254 statistics ---
16: 1 packets transmitted, 1 packets received, 0% unanswered (0 extra)
16: rtt min/avg/max/std-dev = 0.008/0.008/0.008/0.000 ms
16: PING 200.1.1.1 (200.1.1.1) 56(84) bytes of data.
16: 64 bytes from 200.1.1.1: icmp_seq=1 ttl=63 time=0.133 ms
16: 64 bytes from 200.1.1.1: icmp_seq=2 ttl=63 time=0.072 ms
16:
16: --- 200.1.1.1 ping statistics ---
16: 2 packets transmitted, 2 received, 0% packet loss, time 1011ms
16: rtt min/avg/max/mdev = 0.072/0.102/0.133/0.032 ms
16: [ ID] Interval Transfer Bandwidth
16: [ 9] 0.0- 1.0 sec 2.35 GBytes 20.2 Gbits/sec
16: [ ID] Interval Transfer Bandwidth
16: [ 10] 0.0- 1.0 sec 2.35 GBytes 20.0 Gbits/sec
16: Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC
16: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 200.1.1.1 () port 0 AF_INET : demo
16: Recv Send Send
16: Socket Socket Message Elapsed
16: Size Size Size Time Throughput
16: bytes bytes bytes secs. 10^6bits/sec
16:
16: 87380 16384 65160 1.00 20645.91
16: MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 200.1.1.1 () port 0 AF_INET : demo : first burst 0
16: Local /Remote
16: Socket Size Request Resp. Elapsed Trans.
16: Send Recv Size Size Time Rate
16: bytes Bytes bytes bytes secs. per sec
16:
16: 16384 87380 1 1 1.00 19851.91
16: 16384 87380
16: .
16: ----------------------------------------------------------------------
16: Ran 1 test in 9.923s
16:
16: OK
16/47 Test #16: py_test_brb ...................... Passed 10.05 sec
test 17
Start 17: py_test_brb2
17: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_brb2_c" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_brb2.py" "test_brb2.c"
17: Test timeout computed to be: 9.99988e+06
17: net.ipv4.ip_forward = 1
17: PING 200.1.1.1 (200.1.1.1) 56(84) bytes of data.
17: 64 bytes from 200.1.1.1: icmp_seq=1 ttl=63 time=0.193 ms
17: 64 bytes from 200.1.1.1: icmp_seq=2 ttl=63 time=0.079 ms
17:
17: --- 200.1.1.1 ping statistics ---
17: 2 packets transmitted, 2 received, 0% packet loss, time 1002ms
17: rtt min/avg/max/mdev = 0.079/0.136/0.193/0.057 ms
17: [ ID] Interval Transfer Bandwidth
17: [ 9] 0.0- 1.0 sec 2.08 GBytes 17.8 Gbits/sec
17: [ ID] Interval Transfer Bandwidth
17: [ 10] 0.0- 1.0 sec 2.08 GBytes 17.7 Gbits/sec
17: Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC
17: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 200.1.1.1 () port 0 AF_INET : demo
17: Recv Send Send
17: Socket Socket Message Elapsed
17: Size Size Size Time Throughput
17: bytes bytes bytes secs. 10^6bits/sec
17:
17: 87380 16384 65160 1.00 19408.42
17: MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 200.1.1.1 () port 0 AF_INET : demo : first burst 0
17: Local /Remote
17: Socket Size Request Resp. Elapsed Trans.
17: Send Recv Size Size Time Rate
17: bytes Bytes bytes bytes secs. per sec
17:
17: 16384 87380 1 1 1.00 18502.54
17: 16384 87380
17: .
17: ----------------------------------------------------------------------
17: Ran 1 test in 8.130s
17:
17: OK
17/47 Test #17: py_test_brb2 ..................... Passed 8.31 sec
test 18
Start 18: py_test_clang
18: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_clang" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_clang.py"
18: Test timeout computed to be: 9.99988e+06
18: ................./virtual/main.c:2:1: error: field has incomplete type 'struct key_t'
18: BPF_HASH(drops, struct key_t);
18: ^
18: /virtual/include/bcc/helpers.h:257:48: note: expanded from macro 'BPF_HASH'
18: BPF_HASHX(__VA_ARGS__, BPF_HASH4, BPF_HASH3, BPF_HASH2, BPF_HASH1)(__VA_ARGS__)
18: ^
18: /virtual/main.c:2:24: note: forward declaration of 'struct key_t'
18: BPF_HASH(drops, struct key_t);
18: ^
18: /virtual/main.c:2:1: error: field has incomplete type 'struct key_t'
18: BPF_HASH(drops, struct key_t);
18: ^
18: /virtual/include/bcc/helpers.h:257:48: note: expanded from macro 'BPF_HASH'
18: BPF_HASHX(__VA_ARGS__, BPF_HASH4, BPF_HASH3, BPF_HASH2, BPF_HASH1)(__VA_ARGS__)
18: ^
18: /virtual/main.c:2:24: note: forward declaration of 'struct key_t'
18: BPF_HASH(drops, struct key_t);
18: ^
18: 2 errors generated.
18: ../virtual/main.c:6:12: error: cannot call non-static helper function
18: return bar();
18: ^
18: 1 error generated.
18: ...s....................................../virtual/main.c:7:12: warning: incompatible pointer to integer conversion returning 'u32 *' (aka 'unsigned int *') from a function with result type 'int' [-Wint-conversion]
18: return *(&skp->sk_daddr);
18: ^~~~~~~~~~~~~~~~~
18: 1 warning generated.
18: ................/virtual/main.c:1:30: error: expected expression
18: int failure(void *ctx) { if (); return 0; }
18: ^
18: 1 error generated.
18: ../virtual/main.c:3:73: error: too many arguments, bcc only supports in-register parameters
18: int many(struct pt_regs *ctx, int a, int b, int c, int d, int e, int f, int g) {
18: ^
18: 1 error generated.
18: ....
18: ----------------------------------------------------------------------
18: Ran 83 tests in 86.024s
18:
18: OK (skipped=1)
18: 0
18/47 Test #18: py_test_clang .................... Passed 86.59 sec
test 19
Start 19: py_test_histogram
19: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_histogram" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_histogram.py"
19: Test timeout computed to be: 9.99988e+06
19:
19: Bucket ptr = 'java'
19: value : count distribution
19: 0 -> 1 : 0 | |
19: 2 -> 3 : 0 | |
19: 4 -> 7 : 0 | |
19: 8 -> 15 : 0 | |
19: 16 -> 31 : 0 | |
19: 32 -> 63 : 0 | |
19: 64 -> 127 : 0 | |
19: 128 -> 255 : 0 | |
19: 256 -> 511 : 0 | |
19: 512 -> 1023 : 0 | |
19: 1024 -> 2047 : 0 | |
19: 2048 -> 4095 : 0 | |
19: 4096 -> 8191 : 0 | |
19: 8192 -> 16383 : 0 | |
19: 16384 -> 32767 : 0 | |
19: 32768 -> 65535 : 0 | |
19: 65536 -> 131071 : 0 | |
19: 131072 -> 262143 : 0 | |
19: 262144 -> 524287 : 0 | |
19: 524288 -> 1048575 : 0 | |
19: 1048576 -> 2097151 : 0 | |
19: 2097152 -> 4194303 : 0 | |
19: 4194304 -> 8388607 : 0 | |
19: 8388608 -> 16777215 : 0 | |
19: 16777216 -> 33554431 : 0 | |
19: 33554432 -> 67108863 : 56 |********************|
19: 67108864 -> 134217727 : 0 | |
19: 134217728 -> 268435455 : 0 | |
19: 268435456 -> 536870911 : 0 | |
19: 536870912 -> 1073741823 : 0 | |
19: 1073741824 -> 2147483647 : 0 | |
19: 2147483648 -> 4294967295 : 0 | |
19: 4294967296 -> 8589934591 : 0 | |
19: 8589934592 -> 17179869183 : 0 | |
19: 17179869184 -> 34359738367 : 0 | |
19: 34359738368 -> 68719476735 : 0 | |
19: 68719476736 -> 137438953471 : 0 | |
19: 137438953472 -> 274877906943 : 0 | |
19: 274877906944 -> 549755813887 : 0 | |
19: 549755813888 -> 1099511627775 : 2 | |
19:
19: Bucket ptr = 'python'
19: value : count distribution
19: 0 -> 1 : 200 |****************************************|
19:
19: Bucket ptr = 'kworker/u4:0'
19: value : count distribution
19: 0 -> 1 : 2 |******************** |
19: 2 -> 3 : 0 | |
19: 4 -> 7 : 0 | |
19: 8 -> 15 : 0 | |
19: 16 -> 31 : 0 | |
19: 32 -> 63 : 0 | |
19: 64 -> 127 : 0 | |
19: 128 -> 255 : 0 | |
19: 256 -> 511 : 0 | |
19: 512 -> 1023 : 0 | |
19: 1024 -> 2047 : 0 | |
19: 2048 -> 4095 : 0 | |
19: 4096 -> 8191 : 0 | |
19: 8192 -> 16383 : 0 | |
19: 16384 -> 32767 : 0 | |
19: 32768 -> 65535 : 0 | |
19: 65536 -> 131071 : 0 | |
19: 131072 -> 262143 : 0 | |
19: 262144 -> 524287 : 0 | |
19: 524288 -> 1048575 : 0 | |
19: 1048576 -> 2097151 : 0 | |
19: 2097152 -> 4194303 : 0 | |
19: 4194304 -> 8388607 : 0 | |
19: 8388608 -> 16777215 : 0 | |
19: 16777216 -> 33554431 : 0 | |
19: 33554432 -> 67108863 : 4 |****************************************|
19:
19: Bucket ptr = 'kworker/0:10'
19: value : count distribution
19: 0 -> 1 : 2 |****************************************|
19:
19: Bucket ptr = 'iscsid'
19: value : count distribution
19: 0 -> 1 : 0 | |
19: 2 -> 3 : 0 | |
19: 4 -> 7 : 0 | |
19: 8 -> 15 : 0 | |
19: 16 -> 31 : 0 | |
19: 32 -> 63 : 0 | |
19: 64 -> 127 : 0 | |
19: 128 -> 255 : 0 | |
19: 256 -> 511 : 0 | |
19: 512 -> 1023 : 0 | |
19: 1024 -> 2047 : 0 | |
19: 2048 -> 4095 : 0 | |
19: 4096 -> 8191 : 0 | |
19: 8192 -> 16383 : 0 | |
19: 16384 -> 32767 : 0 | |
19: 32768 -> 65535 : 0 | |
19: 65536 -> 131071 : 0 | |
19: 131072 -> 262143 : 0 | |
19: 262144 -> 524287 : 0 | |
19: 524288 -> 1048575 : 0 | |
19: 1048576 -> 2097151 : 0 | |
19: 2097152 -> 4194303 : 0 | |
19: 4194304 -> 8388607 : 0 | |
19: 8388608 -> 16777215 : 0 | |
19: 16777216 -> 33554431 : 0 | |
19: 33554432 -> 67108863 : 2 |****************************************|
19:
19: Bucket ptr = 'ctest'
19: value : count distribution
19: 0 -> 1 : 0 | |
19: 2 -> 3 : 0 | |
19: 4 -> 7 : 0 | |
19: 8 -> 15 : 0 | |
19: 16 -> 31 : 0 | |
19: 32 -> 63 : 0 | |
19: 64 -> 127 : 0 | |
19: 128 -> 255 : 0 | |
19: 256 -> 511 : 0 | |
19: 512 -> 1023 : 0 | |
19: 1024 -> 2047 : 0 | |
19: 2048 -> 4095 : 0 | |
19: 4096 -> 8191 : 0 | |
19: 8192 -> 16383 : 0 | |
19: 16384 -> 32767 : 0 | |
19: 32768 -> 65535 : 0 | |
19: 65536 -> 131071 : 0 | |
19: 131072 -> 262143 : 0 | |
19: 262144 -> 524287 : 0 | |
19: 524288 -> 1048575 : 0 | |
19: 1048576 -> 2097151 : 0 | |
19: 2097152 -> 4194303 : 0 | |
19: 4194304 -> 8388607 : 0 | |
19: 8388608 -> 16777215 : 0 | |
19: 16777216 -> 33554431 : 0 | |
19: 33554432 -> 67108863 : 20 |****************************************|
19:
19: Bucket ptr = 'rcu_sched'
19: value : count distribution
19: 0 -> 1 : 0 | |
19: 2 -> 3 : 0 | |
19: 4 -> 7 : 0 | |
19: 8 -> 15 : 0 | |
19: 16 -> 31 : 0 | |
19: 32 -> 63 : 0 | |
19: 64 -> 127 : 0 | |
19: 128 -> 255 : 0 | |
19: 256 -> 511 : 0 | |
19: 512 -> 1023 : 0 | |
19: 1024 -> 2047 : 0 | |
19: 2048 -> 4095 : 0 | |
19: 4096 -> 8191 : 0 | |
19: 8192 -> 16383 : 0 | |
19: 16384 -> 32767 : 0 | |
19: 32768 -> 65535 : 0 | |
19: 65536 -> 131071 : 0 | |
19: 131072 -> 262143 : 0 | |
19: 262144 -> 524287 : 0 | |
19: 524288 -> 1048575 : 0 | |
19: 1048576 -> 2097151 : 0 | |
19: 2097152 -> 4194303 : 0 | |
19: 4194304 -> 8388607 : 0 | |
19: 8388608 -> 16777215 : 0 | |
19: 16777216 -> 33554431 : 0 | |
19: 33554432 -> 67108863 : 4 |****************************************|
19:
19: Bucket ptr = 'kworker/1:0'
19: value : count distribution
19: 0 -> 1 : 0 | |
19: 2 -> 3 : 0 | |
19: 4 -> 7 : 0 | |
19: 8 -> 15 : 0 | |
19: 16 -> 31 : 0 | |
19: 32 -> 63 : 0 | |
19: 64 -> 127 : 0 | |
19: 128 -> 255 : 0 | |
19: 256 -> 511 : 0 | |
19: 512 -> 1023 : 0 | |
19: 1024 -> 2047 : 0 | |
19: 2048 -> 4095 : 0 | |
19: 4096 -> 8191 : 0 | |
19: 8192 -> 16383 : 0 | |
19: 16384 -> 32767 : 0 | |
19: 32768 -> 65535 : 0 | |
19: 65536 -> 131071 : 0 | |
19: 131072 -> 262143 : 0 | |
19: 262144 -> 524287 : 0 | |
19: 524288 -> 1048575 : 0 | |
19: 1048576 -> 2097151 : 0 | |
19: 2097152 -> 4194303 : 0 | |
19: 4194304 -> 8388607 : 0 | |
19: 8388608 -> 16777215 : 0 | |
19: 16777216 -> 33554431 : 0 | |
19: 33554432 -> 67108863 : 0 | |
19: 67108864 -> 134217727 : 0 | |
19: 134217728 -> 268435455 : 0 | |
19: 268435456 -> 536870911 : 0 | |
19: 536870912 -> 1073741823 : 0 | |
19: 1073741824 -> 2147483647 : 0 | |
19: 2147483648 -> 4294967295 : 0 | |
19: 4294967296 -> 8589934591 : 0 | |
19: 8589934592 -> 17179869183 : 0 | |
19: 17179869184 -> 34359738367 : 0 | |
19: 34359738368 -> 68719476735 : 2 |********************|
19:
19: Bucket ptr = 'swapper/0'
19: value : count distribution
19: 0 -> 1 : 0 | |
19: 2 -> 3 : 0 | |
19: 4 -> 7 : 0 | |
19: 8 -> 15 : 0 | |
19: 16 -> 31 : 0 | |
19: 32 -> 63 : 0 | |
19: 64 -> 127 : 0 | |
19: 128 -> 255 : 0 | |
19: 256 -> 511 : 0 | |
19: 512 -> 1023 : 0 | |
19: 1024 -> 2047 : 0 | |
19: 2048 -> 4095 : 0 | |
19: 4096 -> 8191 : 0 | |
19: 8192 -> 16383 : 0 | |
19: 16384 -> 32767 : 0 | |
19: 32768 -> 65535 : 0 | |
19: 65536 -> 131071 : 0 | |
19: 131072 -> 262143 : 0 | |
19: 262144 -> 524287 : 0 | |
19: 524288 -> 1048575 : 0 | |
19: 1048576 -> 2097151 : 0 | |
19: 2097152 -> 4194303 : 0 | |
19: 4194304 -> 8388607 : 0 | |
19: 8388608 -> 16777215 : 0 | |
19: 16777216 -> 33554431 : 0 | |
19: 33554432 -> 67108863 : 2 | |
19: 67108864 -> 134217727 : 0 | |
19: 134217728 -> 268435455 : 0 | |
19: 268435456 -> 536870911 : 0 | |
19: 536870912 -> 1073741823 : 0 | |
19: 1073741824 -> 2147483647 : 0 | |
19: 2147483648 -> 4294967295 : 0 | |
19: 4294967296 -> 8589934591 : 0 | |
19: 8589934592 -> 17179869183 : 0 | |
19: 17179869184 -> 34359738367 : 0 | |
19: 34359738368 -> 68719476735 : 0 | |
19: 68719476736 -> 137438953471 : 0 | |
19: 137438953472 -> 274877906943 : 0 | |
19: 274877906944 -> 549755813887 : 0 | |
19: 549755813888 -> 1099511627775 : 202 |********************|
19:
19: Bucket ptr = 'swapper/1'
19: value : count distribution
19: 0 -> 1 : 0 | |
19: 2 -> 3 : 0 | |
19: 4 -> 7 : 0 | |
19: 8 -> 15 : 0 | |
19: 16 -> 31 : 0 | |
19: 32 -> 63 : 0 | |
19: 64 -> 127 : 0 | |
19: 128 -> 255 : 0 | |
19: 256 -> 511 : 0 | |
19: 512 -> 1023 : 0 | |
19: 1024 -> 2047 : 0 | |
19: 2048 -> 4095 : 0 | |
19: 4096 -> 8191 : 0 | |
19: 8192 -> 16383 : 0 | |
19: 16384 -> 32767 : 0 | |
19: 32768 -> 65535 : 0 | |
19: 65536 -> 131071 : 0 | |
19: 131072 -> 262143 : 0 | |
19: 262144 -> 524287 : 0 | |
19: 524288 -> 1048575 : 0 | |
19: 1048576 -> 2097151 : 0 | |
19: 2097152 -> 4194303 : 0 | |
19: 4194304 -> 8388607 : 0 | |
19: 8388608 -> 16777215 : 0 | |
19: 16777216 -> 33554431 : 0 | |
19: 33554432 -> 67108863 : 8 |*** |
19: 67108864 -> 134217727 : 0 ....
19: ----------------------------------------------------------------------
19: Ran 4 tests in 3.812s
19:
19: OK
19: | |
19: 134217728 -> 268435455 : 0 | |
19: 268435456 -> 536870911 : 0 | |
19: 536870912 -> 1073741823 : 0 | |
19: 1073741824 -> 2147483647 : 0 | |
19: 2147483648 -> 4294967295 : 0 | |
19: 4294967296 -> 8589934591 : 0 | |
19: 8589934592 -> 17179869183 : 0 | |
19: 17179869184 -> 34359738367 : 0 | |
19: 34359738368 -> 68719476735 : 48 |********************|
19: 68719476736 -> 137438953471 : 10 |**** |
19: 137438953472 -> 274877906943 : 0 | |
19: 274877906944 -> 549755813887 : 0 | |
19: 549755813888 -> 1099511627775 : 20 |******** |
19/47 Test #19: py_test_histogram ................ Passed 3.87 sec
test 20
Start 20: py_array
20: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_array" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_array.py"
20: Test timeout computed to be: 9.99988e+06
20: ....
20: ----------------------------------------------------------------------
20: Ran 4 tests in 1.622s
20:
20: OK
20/47 Test #20: py_array ......................... Passed 1.68 sec
test 21
Start 21: py_uprobes
21: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_uprobes" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_uprobes.py"
21: Test timeout computed to be: 9.99988e+06
21: .Python 2.7.15rc1
21: .Arena 0:
21: system bytes = 30490624
21: in use bytes = 2965584
21: Total (incl. mmap):
21: system bytes = 31281152
21: in use bytes = 3756112
21: max mmap regions = 7
21: max mmap bytes = 9203712
21: .
21: ----------------------------------------------------------------------
21: Ran 3 tests in 8.675s
21:
21: OK
21/47 Test #21: py_uprobes ....................... Passed 8.74 sec
test 22
Start 22: py_uprobes_2
22: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_uprobes2" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_uprobes2.py"
22: Test timeout computed to be: 9.99988e+06
22: .
22: ----------------------------------------------------------------------
22: Ran 1 test in 0.281s
22:
22: OK
22/47 Test #22: py_uprobes_2 ..................... Passed 0.36 sec
test 23
Start 23: py_test_stackid
23: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_stackid" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_stackid.py"
23: Test timeout computed to be: 9.99988e+06
23: s.
23: ----------------------------------------------------------------------
23: Ran 2 tests in 0.373s
23:
23: OK (skipped=1)
23/47 Test #23: py_test_stackid .................. Passed 0.53 sec
test 24
Start 24: py_test_tracepoint
24: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_tracepoint" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_tracepoint.py"
24: Test timeout computed to be: 9.99988e+06
24: ..
24: ----------------------------------------------------------------------
24: Ran 2 tests in 2.493s
24:
24: OK
24/47 Test #24: py_test_tracepoint ............... Passed 2.63 sec
test 25
Start 25: py_test_perf_event
25: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_perf_event" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_perf_event.py"
25: Test timeout computed to be: 9.99988e+06
25: perf_event_open: No such file or directory
25: s
25: ----------------------------------------------------------------------
25: Ran 1 test in 0.357s
25:
25: OK (skipped=1)
25/47 Test #25: py_test_perf_event ............... Passed 0.51 sec
test 26
Start 26: py_test_attach_perf_event
26: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_attach_perf_event" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_attach_perf_event.py"
26: Test timeout computed to be: 9.99988e+06
26: perf_event_open failed: No such file or directory
26: CRITICAL:root:WARNING! Test test_attach_raw_event_powerpc (__main__.TestPerfAttachRaw) failed, but marked as passed because it is decorated with @mayFail.
26: CRITICAL:root: The reason why this mayFail was: This fails on github actions environment, hw perf events are not supported
26: CRITICAL:root: The failure was: "None"
26: CRITICAL:root: Stacktrace: "Traceback (most recent call last):
26: File "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/utils.py", line 36, in wrapper
26: res = func(*args, **kwargs)
26: File "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_attach_perf_event.py", line 62, in test_attach_raw_event_powerpc
26: exit()
26: File "/usr/lib/python2.7/site.py", line 366, in __call__
26: raise SystemExit(code)
26: SystemExit: None
26: "
26: .CRITICAL:root:WARNING! Test test_attach_raw_event_x86 (__main__.TestPerfAttachRaw) failed, but marked as passed because it is decorated with @mayFail.
26: CRITICAL:root: The reason why this mayFail was: This fails on github actions environment, hw perf events are not supported
26: CRITICAL:root: The failure was: "bpf_perf_event_data->addr requires kernel >= 4.17"
26: CRITICAL:root: Stacktrace: "Traceback (most recent call last):
26: File "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/utils.py", line 36, in wrapper
26: res = func(*args, **kwargs)
26: File "/usr/lib/python2.7/unittest/case.py", line 62, in skip_wrapper
26: raise SkipTest(reason)
26: SkipTest: bpf_perf_event_data->addr requires kernel >= 4.17
26: "
26: .s
26: ----------------------------------------------------------------------
26: Ran 3 tests in 1.730s
26:
26: OK (skipped=1)
26: Failed to attach to a raw event. Please check the event attr used
26/47 Test #26: py_test_attach_perf_event ........ Passed 1.84 sec
test 27
Start 27: py_test_utils
27: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_utils" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_utils.py"
27: Test timeout computed to be: 9.99988e+06
27: ..
27: ----------------------------------------------------------------------
27: Ran 2 tests in 0.001s
27:
27: OK
27/47 Test #27: py_test_utils .................... Passed 0.09 sec
test 28
Start 28: py_test_percpu
28: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_percpu" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_percpu.py"
28: Test timeout computed to be: 9.99988e+06
28: ....
28: ----------------------------------------------------------------------
28: Ran 4 tests in 2.211s
28:
28: OK
28/47 Test #28: py_test_percpu ................... Passed 2.29 sec
test 29
Start 29: py_test_dump_func
29: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_dump_func" "simple" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_dump_func.py"
29: Test timeout computed to be: 9.99988e+06
29: .
29: ----------------------------------------------------------------------
29: Ran 1 test in 0.137s
29:
29: OK
29/47 Test #29: py_test_dump_func ................ Passed 0.18 sec
test 30
Start 30: py_test_disassembler
30: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_disassembler" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_disassembler.py"
30: Test timeout computed to be: 9.99988e+06
30: ..
30: ----------------------------------------------------------------------
30: Ran 2 tests in 0.244s
30:
30: OK
30/47 Test #30: py_test_disassembler ............. Passed 0.30 sec
test 31
Start 31: py_test_tools_smoke
31: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_tools_smoke" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_tools_smoke.py"
31: Test timeout computed to be: 9.99988e+06
31: Traceback (most recent call last):
31: File "../../tools/argdist.py", line 723, in run
31: self._main_loop()
31: File "../../tools/argdist.py", line 713, in _main_loop
31: exit()
31: File "/usr/lib/python2.7/site.py", line 366, in __call__
31: raise SystemExit(code)
31: SystemExit: None
31: .....'unknown': I need something more specific.
31: .'unknown': I need something more specific.
31: 'unknown': I need something more specific.
31: 'unknown': I need something more specific.
31: 'unknown': I need something more specific.
31: .......s.............'unknown': I need something more specific.
31: ......Killed
31: .s..........libbpf: failed to find valid kernel BTF
31: libbpf: vmlinux BTF is not found
31: ......'unknown': I need something more specific.
31: ...............'unknown': I need something more specific.
31: ...'unknown': I need something more specific.
31: .....'unknown': I need something more specific.
31: ...libbpf: failed to find valid kernel BTF
31: libbpf: vmlinux BTF is not found
31: ......
31: ----------------------------------------------------------------------
31: Ran 83 tests in 279.912s
31:
31: OK (skipped=2)
31/47 Test #31: py_test_tools_smoke .............. Passed 280.01 sec
test 32
Start 32: py_test_tools_memleak
32: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_tools_memleak" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_tools_memleak.py"
32: Test timeout computed to be: 9.99988e+06
32: cannot attach uprobe, Device or resource busy
32: .cannot attach uprobe, Device or resource busy
32: .cannot attach uprobe, Device or resource busy
32: .cannot attach uprobe, Device or resource busy
32: .cannot attach uprobe, Device or resource busy
32: .cannot attach uprobe, Device or resource busy
32: .cannot attach uprobe, Device or resource busy
32: .cannot attach uprobe, Device or resource busy
32: .
32: ----------------------------------------------------------------------
32: Ran 8 tests in 24.165s
32:
32: OK
32/47 Test #32: py_test_tools_memleak ............ Passed 24.27 sec
test 33
Start 33: py_test_usdt
33: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_usdt" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_usdt.py"
33: Test timeout computed to be: 9.99988e+06
33: <stdin>:23:17: warning: null character(s) preserved in literal
33: <stdin>:28:17: warning: null character(s) preserved in literal
33: <stdin>: In function ‘int main()’:
33: <stdin>:25:49: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘uint64_t {aka long unsigned int}’ [-Wformat=]
33: <stdin>:30:49: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘uint64_t {aka long unsigned int}’ [-Wformat=]
33: clang -cc1 -triple x86_64-unknown-linux-gnu -emit-llvm-bc -emit-llvm-uselists -disable-free -disable-llvm-verifier -discard-value-names -main-file-name main.c -mrelocation-model static -mthread-model posix -fno-jump-tables -fmath-errno -masm-verbose -mconstructor-aliases -fuse-init-array -target-cpu x86-64 -dwarf-column-info -debugger-tuning=gdb -momit-leaf-frame-pointer -coverage-notes-file /usr/src/linux-headers-4.15.0-1009-gcp/main.gcno -nostdsysteminc -nobuiltininc -resource-dir lib/clang/6.0.0 -isystem /virtual/lib/clang/include -include ./include/linux/kconfig.h -include /virtual/include/bcc/bpf.h -include /virtual/include/bcc/bpf_workaround.h -include /virtual/include/bcc/helpers.h -isystem /virtual/include -I /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python -D __BPF_TRACING__ -I arch/x86/include/ -I arch/x86/include/generated -I include -I arch/x86/include/uapi -I arch/x86/include/generated/uapi -I include/uapi -I include/generated/uapi -D __KERNEL__ -D KBUILD_MODNAME="bcc" -O2 -Wno-deprecated-declarations -Wno-gnu-variable-sized-type-not-at-end -Wno-pragma-once-outside-header -Wno-address-of-packed-member -Wno-unknown-warning-option -Wno-unused-value -Wno-pointer-sign -fdebug-compilation-dir /usr/src/linux-headers-4.15.0-1009-gcp -ferror-limit 19 -fmessage-length 0 -fobjc-runtime=gcc -fdiagnostics-show-option -vectorize-loops -vectorize-slp -o main.bc -x c /virtual/main.c
33: #if defined(BPF_LICENSE)
33: #error BPF_LICENSE cannot be specified through cflags
33: #endif
33: #if !defined(CONFIG_CC_STACKPROTECTOR)
33: #if defined(CONFIG_CC_STACKPROTECTOR_AUTO) \
33: || defined(CONFIG_CC_STACKPROTECTOR_REGULAR) \
33: || defined(CONFIG_CC_STACKPROTECTOR_STRONG)
33: #define CONFIG_CC_STACKPROTECTOR
33: #endif
33: #endif
33: #define bpf_probe_read_kernel bpf_probe_read
33: #define bpf_probe_read_kernel_str bpf_probe_read_str
33: #define bpf_probe_read_user bpf_probe_read
33: #define bpf_probe_read_user_str bpf_probe_read_str
33: #include <uapi/linux/ptrace.h>
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace1_1(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int8_t)) return -1;
33: switch(PT_REGS_IP(ctx)) {
33: case 0x56224086780bULL: *((int8_t *)dest) = ctx->ax; __asm__ __volatile__("": : :"memory"); return 0;
33: case 0x562240867811ULL: *((int8_t *)dest) = ctx->ax; __asm__ __volatile__("": : :"memory"); return 0;
33: }
33: return -1;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace1_2(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int32_t)) return -1;
33: switch(PT_REGS_IP(ctx)) {
33: case 0x56224086780bULL: { u64 __addr = ctx->bp + -204; __asm__ __volatile__("": : :"memory"); int32_t __res = 0x0; bpf_probe_read_user(&__res, sizeof(__res), (void *)__addr); *((int32_t *)dest) = __res; } return 0;
33: case 0x562240867811ULL: { u64 __addr = ctx->bp + -208; __asm__ __volatile__("": : :"memory"); int32_t __res = 0x0; bpf_probe_read_user(&__res, sizeof(__res), (void *)__addr); *((int32_t *)dest) = __res; } return 0;
33: }
33: return -1;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace3_1(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int32_t)) return -1;
33: switch(PT_REGS_IP(ctx)) {
33: case 0x56224086780cULL: { u64 __addr = ctx->bp + -208; __asm__ __volatile__("": : :"memory"); int32_t __res = 0x0; bpf_probe_read_user(&__res, sizeof(__res), (void *)__addr); *((int32_t *)dest) = __res; } return 0;
33: case 0x56224086781fULL: *((int32_t *)dest) = ctx->ax; __asm__ __volatile__("": : :"memory"); return 0;
33: }
33: return -1;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace3_2(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int32_t)) return -1;
33: switch(PT_REGS_IP(ctx)) {
33: case 0x56224086780cULL: { u64 __addr = ctx->bp + -204; __asm__ __volatile__("": : :"memory"); int32_t __res = 0x0; bpf_probe_read_user(&__res, sizeof(__res), (void *)__addr); *((int32_t *)dest) = __res; } return 0;
33: case 0x56224086781fULL: *((int32_t *)dest) = ctx->dx; __asm__ __volatile__("": : :"memory"); return 0;
33: }
33: return -1;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace2_1(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int32_t)) return -1;
33: *((int32_t *)dest) = 5;
33: return 0;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace2_2(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int8_t)) return -1;
33: *((int8_t *)dest) = ctx->ax; __asm__ __volatile__("": : :"memory");
33: return 0;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace4_1(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int64_t)) return -1;
33: *((int64_t *)dest) = ctx->ax; __asm__ __volatile__("": : :"memory");
33: return 0;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace4_2(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int64_t)) return -1;
33: *((int64_t *)dest) = ctx->dx; __asm__ __volatile__("": : :"memory");
33: return 0;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace5_1(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int64_t)) return -1;
33: *((int64_t *)dest) = ctx->dx; __asm__ __volatile__("": : :"memory");
33: return 0;
33: }
33: __attribute__((always_inline))
33: static __always_inline int _bpf_readarg_do_trace5_2(struct pt_regs *ctx, void *dest, size_t len) {
33: if (len != sizeof(int64_t)) return -1;
33: *((int64_t *)dest) = ctx->ax; __asm__ __volatile__("": : :"memory");
33: return 0;
33: }
33:
33: #include <linux/blkdev.h>
33: #include <uapi/linux/ptrace.h>
33:
33: struct probe_result_t1 {
33: char v1;
33: int v2;
33: };
33:
33: struct probe_result_t2 {
33: int v1;
33: char v2;
33: };
33:
33: struct probe_result_t3 {
33: int v1;
33: int v2;
33: };
33:
33: struct probe_result_t4 {
33: u64 v1;
33: char v2[8];
33: };
33:
33: struct probe_result_t5 {
33: char v1[8];
33: u64 v2;
33: };
33:
33: BPF_PERF_OUTPUT(event1);
33: BPF_PERF_OUTPUT(event2);
33: BPF_PERF_OUTPUT(event3);
33: BPF_PERF_OUTPUT(event4);
33: BPF_PERF_OUTPUT(event5);
33:
33: __attribute__((section(".bpf.fn.do_trace1")))
33: int do_trace1(struct pt_regs *ctx) {
33:
33: struct probe_result_t1 result = {};
33: _bpf_readarg_do_trace1_1(ctx, &result.v1, sizeof(*(&result.v1)));
33: _bpf_readarg_do_trace1_2(ctx, &result.v2, sizeof(*(&result.v2)));
33: bpf_perf_event_output(ctx, bpf_pseudo_fd(1, -1), CUR_CPU_IDENTIFIER, &result, sizeof(result));
33: return 0;
33: };
33: __attribute__((section(".bpf.fn.do_trace2")))
33: int do_trace2(struct pt_regs *ctx) {
33:
33: struct probe_result_t2 result = {};
33: _bpf_readarg_do_trace2_1(ctx, &result.v1, sizeof(*(&result.v1)));
33: _bpf_readarg_do_trace2_2(ctx, &result.v2, sizeof(*(&result.v2)));
33: bpf_perf_event_output(ctx, bpf_pseudo_fd(1, -2), CUR_CPU_IDENTIFIER, &result, sizeof(result));
33: return 0;
33: }
33: __attribute__((section(".bpf.fn.do_trace3")))
33: int do_trace3(struct pt_regs *ctx) {
33:
33: struct probe_result_t3 result = {};
33: _bpf_readarg_do_trace3_1(ctx, &result.v1, sizeof(*(&result.v1)));
33: _bpf_readarg_do_trace3_2(ctx, &result.v2, sizeof(*(&result.v2)));
33: bpf_perf_event_output(ctx, bpf_pseudo_fd(1, -3), CUR_CPU_IDENTIFIER, &result, sizeof(result));
33: return 0;
33: }
33: __attribute__((section(".bpf.fn.do_trace4")))
33: int do_trace4(struct pt_regs *ctx) {
33:
33: struct probe_result_t4 result = {};
33: _bpf_readarg_do_trace4_1(ctx, &result.v1, sizeof(*(&result.v1)));
33: ({ u64 __addr = 0x0; _bpf_readarg_do_trace4_2(ctx, &__addr, sizeof(__addr));bpf_probe_read(&result.v2, sizeof(result.v2), (void *)__addr);});
33: bpf_perf_event_output(ctx, bpf_pseudo_fd(1, -4), CUR_CPU_IDENTIFIER, &result, sizeof(result));
33: return 0;
33: }
33: __attribute__((section(".bpf.fn.do_trace5")))
33: int do_trace5(struct pt_regs *ctx) {
33:
33: struct probe_result_t5 result = {};
33: ({ u64 __addr = 0x0; _bpf_readarg_do_trace5_1(ctx, &__addr, sizeof(__addr));bpf_probe_read(&result.v1, sizeof(result.v1), (void *)__addr);});
33: _bpf_readarg_do_trace5_2(ctx, &result.v2, sizeof(*(&result.v2)));
33: bpf_perf_event_output(ctx, bpf_pseudo_fd(1, -5), CUR_CPU_IDENTIFIER, &result, sizeof(result));
33: return 0;
33: }
33:
33: #include <bcc/footer.h>
33: .
33: ----------------------------------------------------------------------
33: Ran 1 test in 4.056s
33:
33: OK
33: Running from kernel directory at: /lib/modules/4.15.0-1009-gcp/build
33: str5
33: str4
33: str7
33: str6
33: str9
33: str8
33/47 Test #33: py_test_usdt ..................... Passed 4.36 sec
test 34
Start 34: py_test_usdt2
34: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_usdt2" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_usdt2.py"
34: Test timeout computed to be: 9.99988e+06
34: .
34: ----------------------------------------------------------------------
34: Ran 1 test in 3.055s
34:
34: OK
34/47 Test #34: py_test_usdt2 .................... Passed 3.26 sec
test 35
Start 35: py_test_usdt3
35: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_usdt3" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_usdt3.py"
35: Test timeout computed to be: 9.99988e+06
35: test:probe [sema 0x0]
35: location #1 /proc/8840/root/tmp/tmpdQocWa/liba.so 0x581
35: argument #1 4 signed bytes @ *(bp - 4)
35: location #2 /proc/8840/root/tmp/tmpdQocWa/libb.so 0x581
35: argument #1 4 signed bytes @ *(bp - 4)
35: location #3 /proc/8840/root/tmp/tmpdQocWa/a.out 0x7b1
35: argument #1 4 signed bytes @ *(bp - 4)
35: test_dup_name:probe [sema 0x0]
35: location #1 /proc/8840/root/tmp/tmpdQocWa/liba.so 0x582
35: argument #1 4 signed bytes @ *(bp - 4)
35: location #2 /proc/8840/root/tmp/tmpdQocWa/libb.so 0x582
35: argument #1 4 signed bytes @ *(bp - 4)
35: location #3 /proc/8840/root/tmp/tmpdQocWa/a.out 0x7b2
35: argument #1 4 signed bytes @ *(bp - 4)
35: libc:setjmp [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x3ebb1
35: argument #1 8 unsigned bytes @ di
35: argument #2 4 signed bytes @ si
35: argument #3 8 unsigned bytes @ ax
35: libc:longjmp [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x3ec93
35: argument #1 8 unsigned bytes @ di
35: argument #2 4 signed bytes @ si
35: argument #3 8 unsigned bytes @ dx
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x134bc3
35: argument #1 8 unsigned bytes @ di
35: argument #2 4 signed bytes @ si
35: argument #3 8 unsigned bytes @ dx
35: libc:longjmp_target [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x3ecaf
35: argument #1 8 unsigned bytes @ di
35: argument #2 4 signed bytes @ ax
35: argument #3 8 unsigned bytes @ dx
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x134bdf
35: argument #1 8 unsigned bytes @ di
35: argument #2 4 signed bytes @ ax
35: argument #3 8 unsigned bytes @ dx
35: libc:memory_mallopt_arena_max [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x906e3
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ *(&mp_ + 32)
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9ac79
35: argument #1 8 unsigned bytes @ bx
35: argument #2 8 unsigned bytes @ *(&mp_ + 32)
35: libc:memory_mallopt_arena_test [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x906f3
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ *(&mp_ + 24)
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9ac91
35: argument #1 8 unsigned bytes @ bx
35: argument #2 8 unsigned bytes @ *(&mp_ + 24)
35: libc:memory_tunable_tcache_max_bytes [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9070b
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ *(&mp_ + 88)
35: libc:memory_tunable_tcache_count [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x90743
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ *(&mp_ + 96)
35: libc:memory_tunable_tcache_unsorted_limit [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x90753
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ *(&mp_ + 104)
35: libc:memory_mallopt_trim_threshold [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x90863
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ *(&mp_ + 0)
35: argument #3 4 signed bytes @ *(&mp_ + 52)
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9ac10
35: argument #1 8 unsigned bytes @ bx
35: argument #2 8 unsigned bytes @ *(&mp_ + 0)
35: argument #3 4 signed bytes @ *(&mp_ + 52)
35: libc:memory_mallopt_top_pad [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x90883
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ *(&mp_ + 8)
35: argument #3 4 signed bytes @ *(&mp_ + 52)
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9ad40
35: argument #1 8 unsigned bytes @ bx
35: argument #2 8 unsigned bytes @ *(&mp_ + 8)
35: argument #3 4 signed bytes @ *(&mp_ + 52)
35: libc:memory_mallopt_mmap_threshold [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x908ab
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ *(&mp_ + 16)
35: argument #3 4 signed bytes @ *(&mp_ + 52)
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9ad1f
35: argument #1 8 unsigned bytes @ bx
35: argument #2 8 unsigned bytes @ *(&mp_ + 16)
35: argument #3 4 signed bytes @ *(&mp_ + 52)
35: libc:memory_mallopt_mmap_max [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x908c3
35: argument #1 4 signed bytes @ ax
35: argument #2 4 signed bytes @ *(&mp_ + 44)
35: argument #3 4 signed bytes @ *(&mp_ + 52)
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9acf0
35: argument #1 4 signed bytes @ bx
35: argument #2 4 signed bytes @ *(&mp_ + 44)
35: argument #3 4 signed bytes @ *(&mp_ + 52)
35: libc:memory_mallopt_perturb [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x908e3
35: argument #1 4 signed bytes @ ax
35: argument #2 4 signed bytes @ *(&perturb_byte + 0)
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9aca0
35: argument #1 4 signed bytes @ bx
35: argument #2 4 signed bytes @ *(&perturb_byte + 0)
35: libc:memory_heap_new [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x90c4e
35: argument #1 8 unsigned bytes @ bx
35: argument #2 8 unsigned bytes @ bp
35: libc:memory_sbrk_less [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9138d
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 signed bytes @ bp
35: libc:memory_arena_reuse [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x91865
35: argument #1 8 unsigned bytes @ dx
35: argument #2 8 unsigned bytes @ bx
35: libc:memory_arena_reuse_wait [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x91975
35: argument #1 8 unsigned bytes @ dx
35: argument #2 8 unsigned bytes @ dx
35: argument #3 8 unsigned bytes @ bx
35: libc:memory_arena_new [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x91bd0
35: argument #1 8 unsigned bytes @ dx
35: argument #2 8 unsigned bytes @ bp
35: libc:memory_arena_reuse_free_list [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x91e8c
35: argument #1 8 unsigned bytes @ dx
35: libc:memory_arena_retry [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x91fc9
35: argument #1 8 unsigned bytes @ si
35: argument #2 8 unsigned bytes @ di
35: libc:memory_heap_free [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x933e6
35: argument #1 8 unsigned bytes @ r10
35: argument #2 8 unsigned bytes @ ax
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x98214
35: argument #1 8 unsigned bytes @ r14
35: argument #2 8 unsigned bytes @ ax
35: location #3 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x19bfd0
35: argument #1 8 unsigned bytes @ r11
35: argument #2 8 unsigned bytes @ ax
35: libc:memory_heap_less [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x93803
35: argument #1 8 unsigned bytes @ r10
35: argument #2 8 unsigned bytes @ r15
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9863c
35: argument #1 8 unsigned bytes @ r14
35: argument #2 8 unsigned bytes @ r15
35: location #3 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x19c44e
35: argument #1 8 unsigned bytes @ r11
35: argument #2 8 unsigned bytes @ r15
35: libc:memory_heap_more [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x93b3a
35: argument #1 8 unsigned bytes @ r9
35: argument #2 8 unsigned bytes @ r8
35: libc:memory_sbrk_more [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x93daf
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 signed bytes @ r12
35: libc:memory_mallopt_free_dyn_thresholds [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x97b16
35: argument #1 8 unsigned bytes @ si
35: argument #2 8 unsigned bytes @ ax
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x19baa8
35: argument #1 8 unsigned bytes @ si
35: argument #2 8 unsigned bytes @ ax
35: location #3 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x19c24c
35: argument #1 8 unsigned bytes @ ax
35: argument #2 8 unsigned bytes @ dx
35: libc:memory_malloc_retry [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x96df0
35: argument #1 8 unsigned bytes @ bx
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x973e0
35: argument #1 8 unsigned bytes @ bx
35: libc:memory_memalign_retry [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x978e8
35: argument #1 8 unsigned bytes @ r13
35: argument #2 8 unsigned bytes @ bx
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x99528
35: argument #1 8 unsigned bytes @ r12
35: argument #2 8 unsigned bytes @ bx
35: location #3 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x99a48
35: argument #1 8 unsigned bytes @ r13
35: argument #2 8 unsigned bytes @ bx
35: location #4 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x99ff8
35: argument #1 8 unsigned bytes @ bp
35: argument #2 8 unsigned bytes @ bx
35: location #5 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9b103
35: argument #1 8 unsigned bytes @ bp
35: argument #2 8 unsigned bytes @ bx
35: libc:memory_realloc_retry [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x98bf5
35: argument #1 8 unsigned bytes @ bp
35: argument #2 8 unsigned bytes @ bx
35: location #2 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x99045
35: argument #1 8 unsigned bytes @ bp
35: argument #2 8 unsigned bytes @ bx
35: libc:memory_calloc_retry [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9a3b0
35: argument #1 8 unsigned bytes @ bp
35: libc:memory_mallopt [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9abd4
35: argument #1 4 signed bytes @ bp
35: argument #2 4 signed bytes @ bx
35: libc:memory_mallopt_mxfast [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x9acc6
35: argument #1 4 signed bytes @ bx
35: argument #2 8 unsigned bytes @ *(&global_max_fast + 0)
35: libc:lll_lock_wait_private [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/libc-2.27.so 0x1306a4
35: argument #1 8 unsigned bytes @ di
35: rtld:init_start [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x3df2
35: argument #1 4 signed bytes @ 0
35: argument #2 8 unsigned bytes @ bx
35: rtld:init_complete [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x44d1
35: argument #1 4 signed bytes @ 0
35: argument #2 8 unsigned bytes @ bx
35: rtld:map_failed [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x5ba6
35: argument #1 8 signed bytes @ *(sp + 72)
35: argument #2 8 unsigned bytes @ bp
35: rtld:map_start [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x6b2a
35: argument #1 8 signed bytes @ *(bp + 40)
35: argument #2 8 unsigned bytes @ bx
35: rtld:map_complete [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x14faa
35: argument #1 8 signed bytes @ *(r14 + 40)
35: argument #2 8 unsigned bytes @ bx
35: argument #3 8 unsigned bytes @ r12
35: rtld:reloc_start [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x1507b
35: argument #1 8 signed bytes @ *(r14 + 40)
35: argument #2 8 unsigned bytes @ *(bp - 72)
35: rtld:reloc_complete [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x1541c
35: argument #1 8 signed bytes @ *(r14 + 40)
35: argument #2 8 unsigned bytes @ *(bp - 72)
35: argument #3 8 unsigned bytes @ r12
35: rtld:unmap_start [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x160b7
35: argument #1 8 signed bytes @ r14
35: argument #2 8 unsigned bytes @ bx
35: rtld:unmap_complete [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x16354
35: argument #1 8 signed bytes @ *(bp - 120)
35: argument #2 8 unsigned bytes @ bx
35: rtld:setjmp [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x1d0cd
35: argument #1 8 unsigned bytes @ di
35: argument #2 4 signed bytes @ si
35: argument #3 8 unsigned bytes @ ax
35: rtld:longjmp [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x1d10d
35: argument #1 8 unsigned bytes @ di
35: argument #2 4 signed bytes @ si
35: argument #3 8 unsigned bytes @ dx
35: rtld:longjmp_target [sema 0x0]
35: location #1 /proc/8840/root/lib/x86_64-linux-gnu/ld-2.27.so 0x1d129
35: argument #1 8 unsigned bytes @ di
35: argument #2 4 signed bytes @ ax
35: argument #3 8 unsigned bytes @ dx
35: .
35: ----------------------------------------------------------------------
35: Ran 1 test in 1.128s
35:
35: OK
35: temp directory: /tmp/tmpdQocWa
35/47 Test #35: py_test_usdt3 .................... Passed 1.31 sec
test 36
Start 36: py_test_license
36: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_license" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_license.py"
36: Test timeout computed to be: 9.99988e+06
36: /virtual/main.c:2:2: error: BPF_LICENSE cannot be specified through cflags
36: #error BPF_LICENSE cannot be specified through cflags
36: ^
36: 1 error generated.
36: x/virtual/main.c:2:2: error: BPF_LICENSE cannot be specified through cflags
36: #error BPF_LICENSE cannot be specified through cflags
36: ^
36: 1 error generated.
36: x.bpf: Failed to load program: Invalid argument
36: 0: (bf) r6 = r1
36: 1: (85) call bpf_ktime_get_ns#5
36: cannot call GPL only function from proprietary program
36:
36: x../virtual/main.c:2:2: error: BPF_LICENSE cannot be specified through cflags
36: #error BPF_LICENSE cannot be specified through cflags
36: ^
36: 1 error generated.
36: xbpf: Failed to load program: Invalid argument
36: 0: (bf) r6 = r1
36: 1: (85) call bpf_ktime_get_ns#5
36: cannot call GPL only function from proprietary program
36:
36: x..
36: ----------------------------------------------------------------------
36: Ran 10 tests in 2.884s
36:
36: OK (expected failures=5)
36/47 Test #36: py_test_license .................. Passed 2.94 sec
test 37
Start 37: py_test_free_bcc_memory
37: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_free_bcc_memory" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_free_bcc_memory.py"
37: Test timeout computed to be: 9.99988e+06
37: .
37: ----------------------------------------------------------------------
37: Ran 1 test in 0.280s
37:
37: OK
37: Before freeing llvm memory: RssFile: 45548 kB
37: After freeing llvm memory: RssFile: 13484 kB
37/47 Test #37: py_test_free_bcc_memory .......... Passed 0.39 sec
test 38
Start 38: py_test_rlimit
38: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_rlimit" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_rlimit.py"
38: Test timeout computed to be: 9.99988e+06
38: could not open bpf map: unused, error: Operation not permitted
38: .
38: ----------------------------------------------------------------------
38: Ran 1 test in 0.482s
38:
38: OK
38/47 Test #38: py_test_rlimit ................... Passed 0.53 sec
test 39
Start 39: py_test_lpm_trie
39: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_lpm_trie" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_lpm_trie.py"
39: Test timeout computed to be: 9.99988e+06
39: ..
39: ----------------------------------------------------------------------
39: Ran 2 tests in 0.465s
39:
39: OK
39/47 Test #39: py_test_lpm_trie ................. Passed 0.59 sec
test 40
Start 40: py_ringbuf
40: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_ringbuf" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_ringbuf.py"
40: Test timeout computed to be: 9.99988e+06
40: ssss
40: ----------------------------------------------------------------------
40: Ran 4 tests in 0.000s
40:
40: OK (skipped=4)
40/47 Test #40: py_ringbuf ....................... Passed 0.11 sec
test 41
Start 41: py_queuestack
41: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_queuestack" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_queuestack.py"
41: Test timeout computed to be: 9.99988e+06
41: ss
41: ----------------------------------------------------------------------
41: Ran 2 tests in 0.000s
41:
41: OK (skipped=2)
41/47 Test #41: py_queuestack .................... Passed 0.11 sec
test 42
Start 42: py_test_map_batch_ops
42: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_map_batch_ops" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_map_batch_ops.py"
42: Test timeout computed to be: 9.99988e+06
42: ssssss
42: ----------------------------------------------------------------------
42: Ran 6 tests in 0.000s
42:
42: OK (skipped=6)
42/47 Test #42: py_test_map_batch_ops ............ Passed 0.11 sec
test 43
Start 43: py_test_map_in_map
43: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "py_test_map_in_map" "sudo" "/home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/python/test_map_in_map.py"
43: Test timeout computed to be: 9.99988e+06
43: ...
43: ----------------------------------------------------------------------
43: Ran 3 tests in 0.997s
43:
43: OK
43/47 Test #43: py_test_map_in_map ............... Passed 1.11 sec
test 44
Start 44: lua_test_clang
44: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "lua_test_clang" "sudo" "/usr/bin/luajit" "test_clang.lua"
44: Test timeout computed to be: 9.99988e+06
44: /virtual/main.c:1:30: error: expected expression
44: int failure(void *ctx) { if (); return 0; }
44: ^
44: 1 error generated.
44: ....................
44: Ran 20 tests in 14.191 seconds, 20 successes, 0 failures
44: OK
44/47 Test #44: lua_test_clang ................... Passed 14.22 sec
test 45
Start 45: lua_test_uprobes
45: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "lua_test_uprobes" "sudo" "/usr/bin/luajit" "test_uprobes.lua"
45: Test timeout computed to be: 9.99988e+06
45: Python 2.7.15rc1
45: Arena 0:
45: system bytes = 26787840
45: in use bytes = 1094976
45: Total (incl. mmap):
45: system bytes = 26787840
45: in use bytes = 1094976
45: max mmap regions = 7
45: max mmap bytes = 8556544
45: ..
45: Ran 2 tests in 0.527 seconds, 2 successes, 0 failures
45: OK
45/47 Test #45: lua_test_uprobes ................. Passed 0.66 sec
test 46
Start 46: lua_test_dump
46: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/build/tests/wrapper.sh "lua_test_dump" "sudo" "/usr/bin/luajit" "test_dump.lua"
46: Test timeout computed to be: 9.99988e+06
46: .
46: Ran 1 tests in 0.232 seconds, 1 successes, 0 failures
46: OK
46/47 Test #46: lua_test_dump .................... Passed 0.25 sec
test 47
Start 47: lua_test_standalone
47: Test command: /home/iovisor/jenkins/workspace/bcc-pr/label/ubuntu1804/tests/lua/test_standalone.sh
47: Test timeout computed to be: 9.99988e+06
47: + cd src/lua
47: + [[ ! -x bcc-lua ]]
47: + echo 'bcc-lua not built --- skipping'
47: bcc-lua not built --- skipping
47: + exit 0
47/47 Test #47: lua_test_standalone .............. Passed 0.00 sec
100% tests passed, 0 tests failed out of 47
Total Test time (real) = 501.74 sec
+ head -n 1 Testing/TAG
+ cp Testing/20211012-1450/Test.xml ./CTestResults.xml
Taking single-use agent ubuntu1804-slave-db9 offline.
Finished: SUCCESS
![[Jenkins]](/jenkins/static/53fb901b/images/jenkins-header-logo-v2.svg){kind=logo}
